exhaust timing and deck height ?
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
exhaust timing and deck height ?
im coming up with roughly 185 on the exhaust for new style stock jug. anyone tried 195-200 ? also im seeing near 0 deck height on the piston, which seems right because i remeber the stock head haveing alot of squish.....i dont have a stock head to measure but does the 0 height sound right ???
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
What brand or thickness of base gasket are you using? wiseco/cometic?oem? prox? theyre all different thicknesses when compressed
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- dannygraves
- Posts: 8020
- Joined: June 1st, 2007, 2:03 pm
- Location: Las Vegas, NV
I'm running 190* you'll see how she runs at dumont!
I was running near 0, then dewayne told me not to and modified the squish for me, said that would cause detonation and not improve power.
I was running near 0, then dewayne told me not to and modified the squish for me, said that would cause detonation and not improve power.
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
-
- Posts: 1898
- Joined: June 23rd, 2007, 12:47 pm
- Location: Prescott
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
i only use oem base gaskets. ill torque everything down this weekend and get accurate idea of deck clearance, i just eye balled it without being torqued and it looked about 0Roostius_Maximus wrote:What brand or thickness of base gasket are you using? wiseco/cometic?oem? prox? theyre all different thicknesses when compressed
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
2 base gaskets to increase piston deck clearance, then cut new head to get back the desired squish. maybe dewayne was thinking this ??dannygraves wrote:I'm running 190* you'll see how she runs at dumont!
I was running near 0, then dewayne told me not to and modified the squish for me, said that would cause detonation and not improve power.
this is cool info, check it out http://www.2strokeheads.com/tech1.htm
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
i like pictures to visualize it better also but oh well. that link does say some things that make you wonder though...like how the machinist knows what to do if he only has the jug and not the complete motor ?
how will the machinist know these things without the complete motor there ?
1- what port timings you really have without being able to put degree wheel on it ?
2- piston deck hieght ?...if you dont know this, then how will you really know what the squish will be ???
3- variances in cylinder castings ?
4- piston heights ?
5- actual conecting rod lengths ?
6- base gasket thickness ?
how will the machinist know these things without the complete motor there ?
1- what port timings you really have without being able to put degree wheel on it ?
2- piston deck hieght ?...if you dont know this, then how will you really know what the squish will be ???
3- variances in cylinder castings ?
4- piston heights ?
5- actual conecting rod lengths ?
6- base gasket thickness ?
- dannygraves
- Posts: 8020
- Joined: June 1st, 2007, 2:03 pm
- Location: Las Vegas, NV
yeah, I ended up raising the deck. I put a long rod in my '86 motor and used the cometic spacer. the spacer comes with a specieal thin gasket which is a different part number. instead I used 2 standard gaskets.100hp honda wrote:2 base gaskets to increase piston deck clearance, then cut new head to get back the desired squish. maybe dewayne was thinking this ??dannygraves wrote:I'm running 190* you'll see how she runs at dumont!
I was running near 0, then dewayne told me not to and modified the squish for me, said that would cause detonation and not improve power.
this is cool info, check it out http://www.2strokeheads.com/tech1.htm
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80