Z50 Honda Bikes - UPDATE
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
Z50 Honda Bikes - UPDATE
I don't know about you guys, but i've likely got 4x the hours on an old 85 z50 honda this summer than i did on my 500s.
My boy has an 81 with training wheels, I ride beside him on mine, last week I bought an 80 and an 82
Kball1313 is in on the 50 hoarding too, this week I'll post pictures of my mini fleet.
The 1980 bike is minty but the previous owner said he always needed to bump start it, so before it even gets here I bought a Lifan 125cc enigne for it.
My boy has an 81 with training wheels, I ride beside him on mine, last week I bought an 80 and an 82
Kball1313 is in on the 50 hoarding too, this week I'll post pictures of my mini fleet.
The 1980 bike is minty but the previous owner said he always needed to bump start it, so before it even gets here I bought a Lifan 125cc enigne for it.
Last edited by Roostius_Maximus on October 27th, 2011, 7:05 am, edited 2 times in total.
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- Gravel Scratcher
- Posts: 278
- Joined: September 20th, 2009, 8:45 pm
- Location: Australia, Central QLD
can you guys over there make them road legal ?
we can here and i've been thinking of pimping one up for scooting around town.
price / pics / cond. / location .
i've got a mate bringing a container back from Alabama way soon and looking to bring a few toys back.
we can here and i've been thinking of pimping one up for scooting around town.
price / pics / cond. / location .
i've got a mate bringing a container back from Alabama way soon and looking to bring a few toys back.
if there's one thing dad likes more than serenity… it's a two stroke engine on full throttle!
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
Tonite I completed the transplant of the Lifan 125cc motor into the 1985 Z50. I intended to use it in the 1980 and stil will do that, The weather is good and i want to ride so the bike I had got the engine.
Its hillariously awesome, 1 down 3 up trans, manual clutch and an ebay pipe.
the bike cost 250$, engine 280$, cables, throttle tube, housing and grips 45$, ebay pipe with twice the diamiter of stock but not blubbery loud 60$. "Sno Hog" tires are 20$ each at the goodyear dealer, so i bought a few, then also got some "blem" tires from ebay to burn off, 3 or 4$ each, i forget, 6 of them got here for 40$ tho. I used a 8$ 1 1/2" shielded breather from a stock car valvecover until the airfilter from ebay arrives. new chain 30$, new fenders 65$, hydraulic clutch kit 40$.
I'll be into it 1000$ by the time I like how it looks with a new seat cover and some paint, but hey Its well worth it to ride with my boy. We always rode 50s together but he could get away and I couldnt catch him to stop him if I needed to.
The other 2 spare bikes I have now are called for, my bro is taking one of them and the other is double booked by my cuz and a friend.
I'll post video later, Its just getting to youtube.
Its hillariously awesome, 1 down 3 up trans, manual clutch and an ebay pipe.
the bike cost 250$, engine 280$, cables, throttle tube, housing and grips 45$, ebay pipe with twice the diamiter of stock but not blubbery loud 60$. "Sno Hog" tires are 20$ each at the goodyear dealer, so i bought a few, then also got some "blem" tires from ebay to burn off, 3 or 4$ each, i forget, 6 of them got here for 40$ tho. I used a 8$ 1 1/2" shielded breather from a stock car valvecover until the airfilter from ebay arrives. new chain 30$, new fenders 65$, hydraulic clutch kit 40$.
I'll be into it 1000$ by the time I like how it looks with a new seat cover and some paint, but hey Its well worth it to ride with my boy. We always rode 50s together but he could get away and I couldnt catch him to stop him if I needed to.
The other 2 spare bikes I have now are called for, my bro is taking one of them and the other is double booked by my cuz and a friend.
I'll post video later, Its just getting to youtube.
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
and bro drops to 3rd.....
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
50s
I rode my 50s more than anything else too. Broken collarbone put me out for a long time. Was in 6 pieces and had a bunch of other problems to go with it. Could ride the 50s one armed so I stayed in the game. Rode my '77 Z50 75kms in one day at the cabin. That's a longer ride than most days on the big bikes.
Here's a video of our crf50's from last year. Got a couple vintage Z's going together now though. Gotta get em ready for the 50 nationals by the look of it.
[youtube]http://www.youtube.com/watch?v=_JXBg4Tp ... er&list=UL[/youtube]
Here's a video of our crf50's from last year. Got a couple vintage Z's going together now though. Gotta get em ready for the 50 nationals by the look of it.
[youtube]http://www.youtube.com/watch?v=_JXBg4Tp ... er&list=UL[/youtube]
If if doesn't kill you, it hurts like hell.
Quads are dirtbikes for fat kids.
Quads are dirtbikes for fat kids.
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
my other bikes arrived!
the ones with the yellow wing are the latest
the ones with the yellow wing are the latest
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
the thrush stickered one is amazingly clean. wheels and hubs look like new!
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
never heard of this. looks to have clutch and gears though http://www.ksl.com/index.php?nid=218&ad ... d=&search=
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
that 77 is pretty sweet, kinda jammed for buying more bikes right now.
i did buy a 5th z50, a 1981 again, but we have a disney trip and a cancun trip between dec 9 and jan 9, its going to be hectic!
i did buy a 5th z50, a 1981 again, but we have a disney trip and a cancun trip between dec 9 and jan 9, its going to be hectic!
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
its great!
it cost me 290$ shipped with the new carb, digital igniton, it would also power lights off this setup if needed.
it cost me 290$ shipped with the new carb, digital igniton, it would also power lights off this setup if needed.
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
This is what I'm looking at
http://www.t-motorsports.com/lifan-125c ... fullSite=1
Look like the same thing? $199 +$49.95 to send it in the states
http://www.t-motorsports.com/lifan-125c ... fullSite=1
Look like the same thing? $199 +$49.95 to send it in the states
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
Sure looks like the same beast I have
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
I'm waiting on a new sprocket, everything else is new, why put a used on on it
so, i have genuine 1981 Z50 honda frame, forks and a new OEM seat. Its pictured with original Z swingarm and oem shocks here, but I did some test fitting and the rumor of the XR75 swingarm works. So its getting an OEM XR75 arm and OEM CT70 shocks to stretch her out a bit. ends up at stock ride height again. Unless I make a special bracate to re-locate the rear fender and mount the shocks from it too.
xr75 swinger test fit on bike 4
I bought a couple of them, one i'll shorten 2", so its 1.5" longer than stock, the other is for the boy to hillclimb with.
so, i have genuine 1981 Z50 honda frame, forks and a new OEM seat. Its pictured with original Z swingarm and oem shocks here, but I did some test fitting and the rumor of the XR75 swingarm works. So its getting an OEM XR75 arm and OEM CT70 shocks to stretch her out a bit. ends up at stock ride height again. Unless I make a special bracate to re-locate the rear fender and mount the shocks from it too.
xr75 swinger test fit on bike 4
I bought a couple of them, one i'll shorten 2", so its 1.5" longer than stock, the other is for the boy to hillclimb with.
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
Heres some pictures of the toy I've been working on and playing with.
Started as a well used and abused 1991 Z50R
What do you think? Lol. It's a lot of fun so far.
Jetting needs some attention. The Lifan 125 kit came with what actually looks like a real Keihin carb, I was real skeptical that it would be real but so far I'm impressed. Even the jets are stamped with the Keihin star by the numbers....
Came with a 38 pilot and 88 main. Has a bad lean bog when cracking the throttle that goes away if the choke is left half on. Going to chase down some bigger brass next week.
Started as a well used and abused 1991 Z50R
What do you think? Lol. It's a lot of fun so far.
Jetting needs some attention. The Lifan 125 kit came with what actually looks like a real Keihin carb, I was real skeptical that it would be real but so far I'm impressed. Even the jets are stamped with the Keihin star by the numbers....
Came with a 38 pilot and 88 main. Has a bad lean bog when cracking the throttle that goes away if the choke is left half on. Going to chase down some bigger brass next week.
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
Looks good, I also have that hydraulic clutch but haven't installed it yet.
Stock forks? That beast has way more head to tire clearence than I do. I actually added .950" snubbers in the top of the fork to help the tire of the head.
I've rode mine for the past 4 hours, it's perfect. I did order some white wing graphics for the tank too. Trying the perfect font of the number 1 for the plates, kinda like the Naha style 1.
Can u really keep the chain on that beast?
Stock forks? That beast has way more head to tire clearence than I do. I actually added .950" snubbers in the top of the fork to help the tire of the head.
I've rode mine for the past 4 hours, it's perfect. I did order some white wing graphics for the tank too. Trying the perfect font of the number 1 for the plates, kinda like the Naha style 1.
Can u really keep the chain on that beast?
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd