Building Tips, Suspension Set Ups, Conversion Parts .... Build to your Heart's Content!
UknowDamright
Posts: 57 Joined: April 10th, 2010, 5:58 pmLast active: Location: Hersey, Michigan
Post
by UknowDamright January 9th, 2012, 8:13 am
I found a 06 CRF250 for $750, I am wondering if the stock gas tank will have to be heated and pushed in on the bottom?? I am thinking of buying it.
cmotodad
Posts: 329 Joined: February 8th, 2010, 4:17 pmLast active:
Post
by cmotodad January 9th, 2012, 9:10 am
If you doing a 500 build, yes it will. We used the shortest plug to make the heating area as small as possible.
UknowDamright
Posts: 57 Joined: April 10th, 2010, 5:58 pmLast active: Location: Hersey, Michigan
Post
by UknowDamright January 9th, 2012, 1:14 pm
yeah, doing a conversion....I forgot to mention that, thanks for the info.
Mik329
Posts: 493 Joined: October 2nd, 2007, 2:23 pmLast active: Location: Cumming, GA
Post
by Mik329 January 9th, 2012, 2:05 pm
Look at Bob's tank thread. I bought a Chinese tank that fits and does not need to be heated, it only hold just over a gallon though.
cmotodad
Posts: 329 Joined: February 8th, 2010, 4:17 pmLast active:
Post
by cmotodad January 9th, 2012, 7:28 pm
We did an Acerbis and a stock tank. The stock tank was more difficult that the Acerbis because the plastic on the stock tank is different than the Acerbis, along with the square edges.
100hp honda
Posts: 4394 Joined: July 4th, 2007, 6:57 pmLast active:
Post
by 100hp honda January 9th, 2012, 8:49 pm
is it dirt cheap with blown motor ? cr250 is better choice if you dont want to dick with modifying a bunch of stuff
BBA
Posts: 33 Joined: February 3rd, 2012, 5:32 pmLast active: Location: Mesa, Az
Post
by BBA February 13th, 2012, 9:51 pm
post some pics of that if you will. starting a 06 crf250 conversion myself. 97 cr500 motor. i would like to see how it turned out. im gonna do a IMS desert tank for mine....
CR500!
If you understand
Well then
You understand
