Cable operated choke for PJ
Cable operated choke for PJ
Has anyone ever seen a cable operated choke for the stock PJ Carb? I was going to run a bar mounted choke lever on my tracker project. I thought I remembered seeing this setup on Baja 500's for letting off the throttle after long wide open sections. I will eventually step up to a pwk, is there one available for this carb? Thanks guys.
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
there is a PWK version from the sleds, I have a new one I'd dammn near give you if you end up changing to a pwk carb.
The PWK carbs come with a small needle and seat for use with a pulsepump on the sleds so dont just try to throw one on.
The PWK carbs come with a small needle and seat for use with a pulsepump on the sleds so dont just try to throw one on.
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
39, you gotta watch out for the sizes of the 38, a 38 airstriker has the same size flanges as a 39, but a standard 38pwk is listed as smaller flanges.
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd