41mm PWK - 0-1500' What you running for jets?

[torque monster]

I'm getting really close on the jetting on my carb and want to find out what others with similiar carbs and altitude run. How about any of you California, Florida, Nevada, etc guys run the 41mm and what you using for jets. Yes, I know each bike is somewhat different but just getting ideas. I know how to jet a carb just looking for reference points.

Cheers
Chris

[AlisoBob]

#40 pilot

#172 main

1470 needle, clip in the middle

Its still black around the sliencer cap, I'll prolly go to the 1472 needle for summer.

[torque monster]

Thanks Bob, I was at a 45 pilot and though I might try a 42 or 40 like you've got.

[AlisoBob]

The carb seems to runs best with the air screw about 1 turn out.... adjust the pilot to make this happen....

Get one of these too....... When we ride places like Jawbone where the temps and elevation vary greatly over a weekend... Its really handy to have.


http://www.ziptyracing.com/products/pro ... d=MTEwMA==

[MojoScojo]

Get one of these too....... When we ride places like Jawbone where the temps and elevation vary greatly over a weekend... Its really handy to have.


http://www.ziptyracing.com/products/pro ... d=MTEwMA==

These ROCK!