coolant hoses question ....

All Engine, Clutch, Chains, and Sprockets Stuff Here.
Post Reply
oggo69
Posts: 259
Joined: November 6th, 2008, 5:48 am
Last active:
Location: Dublin , Ireland

coolant hoses question ....

Post by oggo69 »

has anyone used different model honda hoses on their cr500 ?
reason i ask is their is cheap hoses on ebay but they only list cr250


ta
oggo :cool:
Top
robertg
Posts: 299
Joined: September 7th, 2008, 11:03 am
Last active:

Post by robertg »

I just bought blue silicone rad hose and cut it to length.
Top
oggo69
Posts: 259
Joined: November 6th, 2008, 5:48 am
Last active:
Location: Dublin , Ireland

Post by oggo69 »

robertg wrote:I just bought blue silicone rad hose and cut it to length.
:cool: doing some digging and it seems other hoses are sold as cr125/250/500 , i also seen a cr500 hose set on ebay which look identical to cr250 (bends etc) . there is sets for 50 euro on ebay ASI performance is teh sellers name :cool:
Top
robertg
Posts: 299
Joined: September 7th, 2008, 11:03 am
Last active:

Post by robertg »

My 2004 CR125 donor bike had 1/2" hose and the 500 has 5/8". The hose by the water pump on a 500 is 7/8". I think I paid around $5.00/ft.
Top
mega491
Posts: 130
Joined: April 9th, 2008, 8:26 pm
Last active:

Post by mega491 »

On my GenIII (CR 250) conversion the stock hoses from the 91 donor CR 500 worked perfect. I reversed them, left to right then flipped both upside down.
Top
Post Reply

Return to “Drive Tech”