Building Tips, Suspension Set Ups, Conversion Parts .... Build to your Heart's Content!
torque monster
Posts: 193 Joined: June 7th, 2008, 12:04 am
Post
by torque monster » December 3rd, 2008, 4:27 pm
The outlet from the motor is larger than the one on the radiator - anyone have a clean way to go from one size hose to another smaller hose. I know I can get the rad modified but trying to be cheap. Let's see what you've done?
Cheers
Chris
britincali
Posts: 8207 Joined: May 31st, 2007, 7:10 pm
Location: Barstow, CA
Post
by britincali » December 3rd, 2008, 4:29 pm
Wedge the smaller hose onto the bigger inlet.
Coolness list by 90cr500guy
Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
torque monster
Posts: 193 Joined: June 7th, 2008, 12:04 am
Post
by torque monster » December 3rd, 2008, 4:33 pm
britincali wrote: Wedge the smaller hose onto the bigger inlet.
That would by far be the cheapest and it doesn't have to get that much larger - I had thought of that.
Exnav
Posts: 1420 Joined: November 4th, 2007, 8:42 pm
Location: St. Louis, Missouri
Post
by Exnav » December 3rd, 2008, 4:34 pm
Wet the nipple on the water pump with anti-freeze, push hose on, tighten clamp. Drink beer. Finished.
Money ain't got no owners, only spenders - Omar Little
torque monster
Posts: 193 Joined: June 7th, 2008, 12:04 am
Post
by torque monster » December 3rd, 2008, 4:56 pm
I'm going to use the new rad hose as a straw for my beer first, then wedge on. I need an excuse to drink more beer!
supermotoflunkie
Posts: 72 Joined: October 10th, 2008, 7:21 pm
Location: Denver Colorado
Post
by supermotoflunkie » December 7th, 2008, 7:58 pm
Exnav wrote: Wet the nipple on the water pump with anti-freeze, push hose on, tighten clamp. Drink beer. Finished.
I think this is inaccurate. Should be...
Drink beer. wet nipple. drink beer. push hose onto nipple. drink beer. tighten clamp. drink beer. then drink a celebratory beer.
But thats probably why my project is still unfinished....
ShanMan
Posts: 363 Joined: June 18th, 2007, 11:11 pm
Location: Glendale, AZ
Post
by ShanMan » December 8th, 2008, 8:05 am
did somebody say wet nipple?
CR500AC widget maker
dannygraves
Posts: 8020 Joined: June 1st, 2007, 2:03 pm
Location: Las Vegas, NV
Post
by dannygraves » December 8th, 2008, 1:20 pm
autozone has 3/4" -5/8" adapters for like $2 and they work great and make it much less hassle the next time you have the reconnect that hose.
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
torque monster
Posts: 193 Joined: June 7th, 2008, 12:04 am
Post
by torque monster » December 8th, 2008, 2:46 pm
There's the answer I was looking for!
Cheers
Chris
dannygraves wrote: autozone has 3/4" -5/8" adapters for like $2 and they work great and make it much less hassle the next time you have the reconnect that hose.