97 steel roller or complete depending on offer.
97 steel roller or complete depending on offer.
lookin to get rid of my steel roller so i can fund a af build.
Freshly painted frame
New steering stem bearings
clean title (signed from original owner never transfered to new owners)
Skid plates, frame gaurds, so on and so forth.
I am keeping the damper but will leave the mounting hardware so all you will need is a damper with the correct arm on it.
and any other associated frame parts.
New bars
new plastics
New chain slider and Guide
New seat cover still in packaging - Sold Thx TeamDNS
Stock size tank and desert tank
a couple pre-oiled disposable filters
graphics kit never installed will include with it.
Spare seat as well
If the deal is sweet enough i will even throw in a spare rear rim.
I am keeping the ASV's so levers are up to you.
Would prefer someone on the west coast as to avoid crating and shipping since i dont have a crate or a truck to get it to the shipper.
Lets start out at 1800? OBO?
Pretty much everything you see in the pictures less motor and wiring and asv's
Or if someone wants the whole thing ill entertain offers starting at 2500 , Motor needs tuning and will probably include a new carb if it goes as a whole for the right deal.
Motor has decked head, PC Pipe, new FMF Turbine Core 2 silencer, Spare FMF Gnarly Pipe, spare throttle cable, and ill leave the asv's but im still keeping the damper Jug is 1mm over as of now and has 2 bores left 3 if you find the right piston. ( i have always been told 90.5 is the biggest but someone told me otherwise once before )
If no hits ill probably start parting out the spare parts and ebaying a bunch of it off. Just gotta setup a e-bay account first
Freshly painted frame
New steering stem bearings
clean title (signed from original owner never transfered to new owners)
Skid plates, frame gaurds, so on and so forth.
I am keeping the damper but will leave the mounting hardware so all you will need is a damper with the correct arm on it.
and any other associated frame parts.
New bars
new plastics
New chain slider and Guide
New seat cover still in packaging - Sold Thx TeamDNS
Stock size tank and desert tank
a couple pre-oiled disposable filters
graphics kit never installed will include with it.
Spare seat as well
If the deal is sweet enough i will even throw in a spare rear rim.
I am keeping the ASV's so levers are up to you.
Would prefer someone on the west coast as to avoid crating and shipping since i dont have a crate or a truck to get it to the shipper.
Lets start out at 1800? OBO?
Pretty much everything you see in the pictures less motor and wiring and asv's
Or if someone wants the whole thing ill entertain offers starting at 2500 , Motor needs tuning and will probably include a new carb if it goes as a whole for the right deal.
Motor has decked head, PC Pipe, new FMF Turbine Core 2 silencer, Spare FMF Gnarly Pipe, spare throttle cable, and ill leave the asv's but im still keeping the damper Jug is 1mm over as of now and has 2 bores left 3 if you find the right piston. ( i have always been told 90.5 is the biggest but someone told me otherwise once before )
If no hits ill probably start parting out the spare parts and ebaying a bunch of it off. Just gotta setup a e-bay account first
Last edited by ISBB on June 11th, 2008, 6:55 pm, edited 3 times in total.
97 Steel 500 that wants to be an AFC
- kanecr50094
- Posts: 54
- Joined: March 6th, 2008, 5:04 pm
- kanecr50094
- Posts: 54
- Joined: March 6th, 2008, 5:04 pm
QLD ,MARYBOROUGH POSTOFFICE. BUT ALSO I NEED AFTER MY RIDE ON THE WEEKEND NEW FRONT RIM,BUT I THOUGHT OF GETTING A WHOLE SET.HAVE YOU HERD OF THE DNA RIMS,WHEEL PACKAGES?.MY EXPANSION CHAMBER IS A NOLEEN AND AS FAR AS I NO THEY NO LONGER MAKE THEM,BUT NOW HAS A BIG FLAT SPOT ON THE MAGNETO SIDE SO I NEED NEW,EVERY TIME I GET IT PATCHED AND IT IS LOSING ITS TOUGHNESS.WHAT PIPES ARE GOOD?YOU EVER PUT STAINLESS STELOS IN YA EXAUST PACKING?TALK SOON
- kanecr50094
- Posts: 54
- Joined: March 6th, 2008, 5:04 pm
Kane ill check on the shipping and get back to ya. The graphics ill sell at 40% off the regular AMR price since i opened them and pulled them away from their carrier so they are loose but never been stuck on anything. Let me check on shipping and see if its feaseable
97 Steel 500 that wants to be an AFC
- kanecr50094
- Posts: 54
- Joined: March 6th, 2008, 5:04 pm
- dannygraves
- Posts: 8020
- Joined: June 1st, 2007, 2:03 pm
- Location: Las Vegas, NV
Daniel Ryan!? HA, he'd have a fun time trying to get it started!ISBB wrote:HEY MFDB what about that buddy of yours that rides that clapped out KDX??? i know he was always wantin a 500 Ill sell it to a fellow hoon CHEAP
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
- dannygraves
- Posts: 8020
- Joined: June 1st, 2007, 2:03 pm
- Location: Las Vegas, NV
you should have seen him trying to start my gen-1, he actually tried so long he fouled a plug. then he stalled it a while later and James Lewis had to start it for him!!
James is my hero!
James is my hero!
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
- britincali
- Posts: 8207
- Joined: May 31st, 2007, 7:10 pm
- Location: Barstow, CA
- dannygraves
- Posts: 8020
- Joined: June 1st, 2007, 2:03 pm
- Location: Las Vegas, NV
I know somebody wants this thing.. Here lets up the anty.. I will deliver within 250-300 miles for the right offer.. so from so cal to salt lake city or anywhere in between? LHC Bullhead/prescott Ill make it work.. SOMEONE BUY THIS THING i want to start my new project
97 Steel 500 that wants to be an AFC
-
- Posts: 32
- Joined: February 3rd, 2008, 7:27 pm
- Location: Livermore ,California