pwk question
pwk question
well i got a super nice pwk 39 off ebay. so i though. miked it and it turns out its a 36. my question is can i have it borded at the maching shop 3mm and it be the same as a 39? or are there other differences? i would just sell it on ebay but here is the thing it bolts right up to a 450 airbox!!!!! if is the same bored then im gonna do it if not ill sell it on ebay and buy a new pwk from sudco.
-
- Posts: 1898
- Joined: June 23rd, 2007, 12:47 pm
- Location: Prescott
- dannygraves
- Posts: 8020
- Joined: June 1st, 2007, 2:03 pm
- Location: Las Vegas, NV
You definitely want to get the right size....there are a lot of PWK's out there and people dont know what they have. I got mine from a person selling it for a 95 KTM 200 or 300. I called the local KTM shop to see what carb they came with. 39.5 PWK. All I had to do was get the correct needle and jets for it (which Bobs post on the other forum helped me out big time with the jetting). I got it for only $45 with shipping and $20 worth of parts to set it up how I want....priceless. You can just switch your present needle over and get the correct jets for it.
I cleaned my PJ carb up real good, included the jets and needle I didn't need. give it a good description and somebody bought it now for $90.
So I got a better carb and made 20-30 bucks on the deal.
I cleaned my PJ carb up real good, included the jets and needle I didn't need. give it a good description and somebody bought it now for $90.
So I got a better carb and made 20-30 bucks on the deal.