drop off
- 2strokeforever
- Posts: 1524
- Joined: November 13th, 2009, 1:04 pm
- Location: Vernon B.C Canada
drop off
i made a new drop off, im guessing 9' vertical drop, its got a narrow crooked approach and a sidehill landing
i made quite a few false runs before going for it, im running the same suspension that i run in the woods, didnt even touch the clickers
on the last drop i got a little sideways and the wheels landed in a bit of a low spot and with my luck there was the top of a massive rock under the leaves.... ripped the skidplate right off and put a dent in the frame rail
now im on the hunt for a bigger drop but with a rock free landing, and maybe less trees right by the landing area
i know it sounds a little rich on top, dropped my slide and destroyed my last good C series needle, so now im trying out the DGL
i made quite a few false runs before going for it, im running the same suspension that i run in the woods, didnt even touch the clickers
on the last drop i got a little sideways and the wheels landed in a bit of a low spot and with my luck there was the top of a massive rock under the leaves.... ripped the skidplate right off and put a dent in the frame rail
now im on the hunt for a bigger drop but with a rock free landing, and maybe less trees right by the landing area
i know it sounds a little rich on top, dropped my slide and destroyed my last good C series needle, so now im trying out the DGL
the 450 will have less power and will be harder to start, and will be heavier, but to make up for it it will require more maintenance.
4stroke=dead fish
4stroke=dead fish
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
I know how much perspective the camera takes away, nice vid Chris
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
Canadian hoonfest next year?!?!
Manitoba.....B.C. Either way I'm in!
Manitoba.....B.C. Either way I'm in!
Yah, I'm from Saskatchetoon!
MRE 02 250/500 conversion, pulse injector, twirp porting, coolhead, MRE ignition, blah blah blah blah... www.millarengines.com
MRE 02 250/500 conversion, pulse injector, twirp porting, coolhead, MRE ignition, blah blah blah blah... www.millarengines.com
- 2strokeforever
- Posts: 1524
- Joined: November 13th, 2009, 1:04 pm
- Location: Vernon B.C Canada
- NightBiker07
- Posts: 1942
- Joined: April 16th, 2008, 8:59 pm
- Location: USA
You just like riding the nastiest shit you can find, dont you 2strokeforever?
Nice vid!
Nice vid!
2000 CR250, pipe, filter, Vforce
1980 XL80s
1969 Broncco TX-6
Natural selection favors Smart people, so nature selects morons to be slow and dumb for tigers and stuff too eat. But in our modern world there just aren't enough tigers.
1980 XL80s
1969 Broncco TX-6
Natural selection favors Smart people, so nature selects morons to be slow and dumb for tigers and stuff too eat. But in our modern world there just aren't enough tigers.
I used to have no fear when it came to downhill drop offs. I would scare the hell out of my dad on a regular basis. Then one day riding my Suzuki RM50, I went off an 8 ft drop tapped in 3rd and snapped the bike in half. I'm cured. That being said, I still like drop offs, but I keep them small and slow. This one looks fun. Cool vid.
No longer have a CR500.
07 Yamaha YZ250, 17 Husqvarna 701 Enduro
Get on with riding or get on with dying.
https://www.youtube.com/mojoscojo
07 Yamaha YZ250, 17 Husqvarna 701 Enduro
Get on with riding or get on with dying.
https://www.youtube.com/mojoscojo