Methanol - C-12 & Nitrous injected CR500

100hp honda · Post by **100hp honda** » July 30th, 2008, 6:21 pm

right on brotha

. beter get that shit douched out of the motor before it sits long

lewisclan · Post by **lewisclan** » July 30th, 2008, 6:23 pm

I did I rolled it over and sucked about 2 cups of gas& oil throught it

M.F.D.B. · Post by **M.F.D.B.** » August 3rd, 2008, 10:53 pm

Any luck yet man??

lewisclan · Post by **lewisclan** » August 4th, 2008, 7:47 am

havent messed with it yet

100hp honda · Post by **100hp honda** » August 10th, 2008, 7:56 am

any progress yet lewisclan ? ill need to know some "do's" and "dont's" for mine

M.F.D.B. · Post by **M.F.D.B.** » August 10th, 2008, 10:39 am

Do you have a bike??

100hp honda · Post by **100hp honda** » August 10th, 2008, 10:54 am

M.F.D.B. wrote:Do you have a bike??

me ? im working on it (motors about done). i have other financial obligations besides building my bike, which takes alot of fuggin money incase you werent aware of it. some of you own companies, some may have won the lottery, some guys here sit on their ass but always have money

. its a slow process for me but still going forward. one thing is for sure though, when im done building it no one will be telling me to PARK IT....because it will be all mine

M.F.D.B. · Post by **M.F.D.B.** » August 10th, 2008, 10:56 am

100hp honda wrote:

lewisclan · Post by **lewisclan** » August 10th, 2008, 11:50 am

I wont be messing around with it for a few months

dannygraves · Post by **dannygraves** » August 10th, 2008, 2:36 pm

lewisclan wrote:I wont be messing around with it for a few months

lewisclan · Post by **lewisclan** » March 7th, 2010, 6:00 pm

I guess Clyde has brought back som ambition to my project ..........
I built a crank case pressure tester and found 2 leaks on the meth bike 1 was the exhaust gasket not sure it it would matter but I fixed it anyway the 2nd was the Nitrous silenoid conections... fixed that also just needed a wrench anyway I fired her up and it ran bitchen, I removed the vac pump. I still need to build an air cleaner manafold I have one that GSS built for me but I have my Nitrous bottle & bracket that is right inthe way so I need one that will swing up into the airbox area and not through the subframe .
Thanks Clyde ......

o-yeah I still dont know if I screwewd up up override tranny as I dident take it out for a ride but I did have to bang it into gear 2 times to shut it down out at pismo and thats a big NO NO with a over ride tranny

dannygraves · Post by **dannygraves** » March 8th, 2010, 7:47 am

Post by **AlisoBob** » March 8th, 2010, 8:33 am

Great news Jay!!!!

100hp honda · Post by **100hp honda** » March 16th, 2010, 11:01 pm

get that bitch runnin yet ?

. what did you use for a throttle cable and housing ? i was going to see if a modified honda one would work or else ill get a motion pro.

100hp honda · Post by **100hp honda** » March 16th, 2010, 11:05 pm

just checked mine and the notch/flat edge goes toward the reeds side.

lewisclan · Post by **lewisclan** » March 17th, 2010, 7:08 am

100hp honda wrote:get that bitch runnin yet ? . what did you use for a throttle cable and housing ? i was going to see if a modified honda one would work or else ill get a motion pro.

Motion pro and added 5" because of my tall set up

BannedCR500Riders.com

Methanol - C-12 & Nitrous injected CR500