how much does it cost to make one of these bad boys in Aus?
how much does it cost to make one of these bad boys in Aus?
joined a while ago and just started to pull some $$ together.
im Matt and ive currently got a ktm 200 and before that i had a it490 and my dad has a ktm 525. I havent owned a cr500 before but i have ridden one and im pussywhipped on em.
later this year, about July a few mates of his, dad and me are going to the desert.
Dad is taking a ktm 950 adventure, when he gets it.
and i wanna be able to ride a 500af through the really sandy bits to prove to him and all his mates that two strokes really are better
lond story short i dont wanna spend more than $2500 and something that will handle well in the desert.
reckon itll happen?
im Matt and ive currently got a ktm 200 and before that i had a it490 and my dad has a ktm 525. I havent owned a cr500 before but i have ridden one and im pussywhipped on em.
later this year, about July a few mates of his, dad and me are going to the desert.
Dad is taking a ktm 950 adventure, when he gets it.
and i wanna be able to ride a 500af through the really sandy bits to prove to him and all his mates that two strokes really are better
lond story short i dont wanna spend more than $2500 and something that will handle well in the desert.
reckon itll happen?
- NightBiker07
- Posts: 1942
- Joined: April 16th, 2008, 8:59 pm
- Location: USA
Re: how much does it cost to make one of these bad boys in A
if you are crafty, you might get away with that when its all said and done. but you might need a bit more up front, then make money back on the extra parts from both bikes.mat93 wrote:joined a while ago and just started to pull some $$ together.
im Matt and ive currently got a ktm 200 and before that i had a it490 and my dad has a ktm 525. I havent owned a cr500 before but i have ridden one and im pussywhipped on em.
later this year, about July a few mates of his, dad and me are going to the desert.
Dad is taking a ktm 950 adventure, when he gets it.
and i wanna be able to ride a 500af through the really sandy bits to prove to him and all his mates that two strokes really are better
lond story short i dont wanna spend more than $2500 and something that will handle well in the desert.
reckon itll happen?
2000 CR250, pipe, filter, Vforce
1980 XL80s
1969 Broncco TX-6
Natural selection favors Smart people, so nature selects morons to be slow and dumb for tigers and stuff too eat. But in our modern world there just aren't enough tigers.
1980 XL80s
1969 Broncco TX-6
Natural selection favors Smart people, so nature selects morons to be slow and dumb for tigers and stuff too eat. But in our modern world there just aren't enough tigers.
Mate, I don't want to discourage you completely, but unless you've got the engine, electrics, carb etc already, and only if you have a hell of a lot of luck (we just don't get the amazingly cheap deals on donor bikes here like they get in the US) in getting a donor bike in great condition for bugger all, And you can do the conversion yourself, you don't have a hope in Hades in building an AF here in OZ for $2500.
But I wish you luck - you never know what can happen.
I feel like I just told my kid that Santa doesn't really exist..........................................
But I wish you luck - you never know what can happen.
I feel like I just told my kid that Santa doesn't really exist..........................................
Thanks for taking my post in the spirit it was written in , Mat93.
I thought it could be read as my being a real arsehole. Which I certainly can be , at times.
Keep your eyes out, every now and then , you'll find a bargain.
I think engines are becoming a bit more available, with the blokes changing from singles to multis in the mini speedway cars - Asteriod up in Darwin may be the fellow who can point you in the right direction.
Bear
I thought it could be read as my being a real arsehole. Which I certainly can be , at times.
Keep your eyes out, every now and then , you'll find a bargain.
I think engines are becoming a bit more available, with the blokes changing from singles to multis in the mini speedway cars - Asteriod up in Darwin may be the fellow who can point you in the right direction.
Bear
$1500 buck at least for a roller crf 250 or 450 and $3500 for a very tired 500 and thats without converting it and i have found it some what hard to unload my 500 roller bearoso you have been very honest
only posties ride 4 stroke hondas
goldfields sheet metal fabrication
98 yzfr1
05 crf 500 race tech goldies
2010 rmz 500af
01 banshee
goldfields sheet metal fabrication
98 yzfr1
05 crf 500 race tech goldies
2010 rmz 500af
01 banshee
I know you guys are on the other side but there is hope. And I don't mean Hope and Change either.
Bob and Cepek have been pushing me to ride their Af's every time we go riding. I'll wait I tell them. We just want you to see what there like so you will build one.
Nope it's cool I'll wait. Still haven't climbed on to one of those things.
What I am doing is waiting for the right deals to come along and I will build this thing at no cost just time.
Most don't know this but I am a fabricator and have every tool you can think of just waiting to get turned on for this biuld.
So as my youngest son and I were on our way to Pismo Beach for a Lewis clan meeting A friend called me and was ditching his 1993 cr500.
It was in the back of his truck and waiting for someone to make an offer I asked him his bottom dollar.
$800.00 US. Or trade two seats and seat belts for his jeep that he just got. And I will drop it off at your house. This thing is a runner but it's clapped out.
We were going to restore it but it would take too much cash to do that to make it like I would want it to.
We waited for the right AF to come along endless hours of looking on all the sites ect. we even considered driving 16 hours one way to Nevada for two of them for $1200.00 but the drive just wasn't worth it.
Wait some more and BLAMMO!!! This guy sent his wife an E-mail for Christmas telling her he wanted a Divorce so she started selling shit.
It so happens that sitting in the garage was a 2006 crf250r in near perfect condition I wasn't there but my son was and he made a deal I'll take it for $1000.00 SOLD!!!!
I rode that thing the whole weekend at Hoonfest.
So after selling all the parts I should have an AF at $ 00.00
That would be free ninty free U.S.
So keep your hopes up and look for the deals they are there.
And don't believe them Santy Claus does exist.
Bob and Cepek have been pushing me to ride their Af's every time we go riding. I'll wait I tell them. We just want you to see what there like so you will build one.
Nope it's cool I'll wait. Still haven't climbed on to one of those things.
What I am doing is waiting for the right deals to come along and I will build this thing at no cost just time.
Most don't know this but I am a fabricator and have every tool you can think of just waiting to get turned on for this biuld.
So as my youngest son and I were on our way to Pismo Beach for a Lewis clan meeting A friend called me and was ditching his 1993 cr500.
It was in the back of his truck and waiting for someone to make an offer I asked him his bottom dollar.
$800.00 US. Or trade two seats and seat belts for his jeep that he just got. And I will drop it off at your house. This thing is a runner but it's clapped out.
We were going to restore it but it would take too much cash to do that to make it like I would want it to.
We waited for the right AF to come along endless hours of looking on all the sites ect. we even considered driving 16 hours one way to Nevada for two of them for $1200.00 but the drive just wasn't worth it.
Wait some more and BLAMMO!!! This guy sent his wife an E-mail for Christmas telling her he wanted a Divorce so she started selling shit.
It so happens that sitting in the garage was a 2006 crf250r in near perfect condition I wasn't there but my son was and he made a deal I'll take it for $1000.00 SOLD!!!!
I rode that thing the whole weekend at Hoonfest.
So after selling all the parts I should have an AF at $ 00.00
That would be free ninty free U.S.
So keep your hopes up and look for the deals they are there.
And don't believe them Santy Claus does exist.
there are a few aussie builders around
this is one of our bikes
http://bannedcr500riders.com/board/viewtopic.php?t=8028
this is one of our bikes
http://bannedcr500riders.com/board/viewtopic.php?t=8028
OK THAT'S 2 DONE ....
WHO'S IS NEXT????
WHO'S IS NEXT????
AlisoBob wrote:[quote=""SOLID Bro!!""]
And don't believe them Santy Claus does exist.
Britincali-claus[/quote]
I don't want anything he'd bring me. Except a restraining order.
No longer have a CR500.
07 Yamaha YZ250, 17 Husqvarna 701 Enduro
Get on with riding or get on with dying.
https://www.youtube.com/mojoscojo
07 Yamaha YZ250, 17 Husqvarna 701 Enduro
Get on with riding or get on with dying.
https://www.youtube.com/mojoscojo
of course there are deals around but you would be very lucky and i mean kissed on the dick by a fairy to find a 500 in oz for under 3500 and a crf for a 1000 thats pure gold right there but it does happen all i can say is good luck and keep your eyes peelled
dnmac1999 hows about a bit of a intro
dnmac1999 hows about a bit of a intro
only posties ride 4 stroke hondas
goldfields sheet metal fabrication
98 yzfr1
05 crf 500 race tech goldies
2010 rmz 500af
01 banshee
goldfields sheet metal fabrication
98 yzfr1
05 crf 500 race tech goldies
2010 rmz 500af
01 banshee
Well I am from Washington state, I just got a 05 crf250 rolling chassis, but im not going to put the 500 in it, just to much bike for me. Some might even say i am not man enough, and that's fine too. I am going to put my 250 in it though, so I stay with the 2-stroke.
I hear all you aussies have troubles getting deals on stuff over there, so I thought i would throw it out for you. I would be more then happy to ship it out for you guys. My girlfriends Father lives over there, but not sure which town he lives in though. We have shipped plenty of things over there for him.
I have read through a lot of the posts here and have gotten so much information on how to do the frame mod. It has been more then helpful all the information you guys have put up here.
I hear all you aussies have troubles getting deals on stuff over there, so I thought i would throw it out for you. I would be more then happy to ship it out for you guys. My girlfriends Father lives over there, but not sure which town he lives in though. We have shipped plenty of things over there for him.
I have read through a lot of the posts here and have gotten so much information on how to do the frame mod. It has been more then helpful all the information you guys have put up here.
holy schitt did it pass rego?shaggy aus wrote:there are a few aussie builders around
this is one of our bikes
http://bannedcr500riders.com/board/viewtopic.php?t=8028
ive gotta get lucky some time so ill keep an eye out for a fairy like that
dnmac1999 some more info on that would be great
- asteroid500
- Posts: 1047
- Joined: January 5th, 2009, 1:29 am
- Location: Australia Melbourne
i may have a 08-09 CR-125 a shop has had this bike for over a year and the customer has vanished, motors rooted and in a box, the plastics are ruff, but a full set on ebay is bugger all i never went with it as there abit narrower then the 2003 CRF-450 i just bought.
If your gonna tag along with dad'n the boy's you'd better get a big fuck'n tank the 5-hundies are thirsty beast on the tap....but they'll scare the fuck out of ya...in a nice way.
If your gonna tag along with dad'n the boy's you'd better get a big fuck'n tank the 5-hundies are thirsty beast on the tap....but they'll scare the fuck out of ya...in a nice way.
"not speeding officer".....qualifying
CR250 97
CR500 AF 99 (in progress)
CR500 AF CR G-4
CR500 1985 true legend
RGV250 96 X2
GSXR600 07 TRACK BIKE
VH Commadore cup car (race)
CR250 97
CR500 AF 99 (in progress)
CR500 AF CR G-4
CR500 1985 true legend
RGV250 96 X2
GSXR600 07 TRACK BIKE
VH Commadore cup car (race)
cr125
hey asteroid if mat doesnt want that 125 im keen my cousins deal on a 09 450 fell through so we are looking for a roller
only posties ride 4 stroke hondas
goldfields sheet metal fabrication
98 yzfr1
05 crf 500 race tech goldies
2010 rmz 500af
01 banshee
goldfields sheet metal fabrication
98 yzfr1
05 crf 500 race tech goldies
2010 rmz 500af
01 banshee
mat93 wrote:did they make 125s in 08-09? who cares what it looks like i just wanna be able to show all the old dicks up in the sand
where is this frame?
2007 was the last year Honda made the CR125 but they still had 07 models left that they were selling in 08 and into 09.
Jack Schitt
DIE FIRST, worry about it later!
DON'T talk about it, Just DO IT!
When in doubt, GO FLAT OUT!
2001 CR500R1 - SOLD
2007 CR250R7 - SOLD
Wife and Daughter - Left Aug 17 - 2010
Jack Schitt - ??????????????
DIE FIRST, worry about it later!
DON'T talk about it, Just DO IT!
When in doubt, GO FLAT OUT!
2001 CR500R1 - SOLD
2007 CR250R7 - SOLD
Wife and Daughter - Left Aug 17 - 2010
Jack Schitt - ??????????????
- asteroid500
- Posts: 1047
- Joined: January 5th, 2009, 1:29 am
- Location: Australia Melbourne
I'll get it cheaper then you so i'll let you know Monday arvo,
Tennant Creek Northern Territory, is were its at, motor went "BANG" and he couldnt afford to fix it and then he went missing.
Hope he wasnt a hitch hiking pack backer....
Tennant Creek Northern Territory, is were its at, motor went "BANG" and he couldnt afford to fix it and then he went missing.
Hope he wasnt a hitch hiking pack backer....
"not speeding officer".....qualifying
CR250 97
CR500 AF 99 (in progress)
CR500 AF CR G-4
CR500 1985 true legend
RGV250 96 X2
GSXR600 07 TRACK BIKE
VH Commadore cup car (race)
CR250 97
CR500 AF 99 (in progress)
CR500 AF CR G-4
CR500 1985 true legend
RGV250 96 X2
GSXR600 07 TRACK BIKE
VH Commadore cup car (race)
- asteroid500
- Posts: 1047
- Joined: January 5th, 2009, 1:29 am
- Location: Australia Melbourne