1 more Aussie 09' 450R
- Gravel Scratcher
- Posts: 278
- Joined: September 20th, 2009, 8:45 pm
- Location: Australia, Central QLD
1 more Aussie 09' 450R
Santa came early.........
http://farm3.static.flickr.com/2717/405 ... c3ba9c.jpg
(sorry about the link but i'll be rooted if i could get the pic to show by itself)
Now to find the motor so i can start measuring.
Cheers
http://farm3.static.flickr.com/2717/405 ... c3ba9c.jpg
(sorry about the link but i'll be rooted if i could get the pic to show by itself)
Now to find the motor so i can start measuring.
Cheers
if there's one thing dad likes more than serenity… it's a two stroke engine on full throttle!
Re: 1 more Aussie 09' 450R
Gravel Scratcher wrote:Santa came early.........
http://farm3.static.flickr.com/2717/405 ... c3ba9c.jpg
(sorry about the link but i'll be rooted if i could get the pic to show by itself)
Now to find the motor so i can start measuring.
Cheers
AAHHA! Just bullshit and tell everybody your gearing up to build one. Like bob will ever find out.
- Gravel Scratcher
- Posts: 278
- Joined: September 20th, 2009, 8:45 pm
- Location: Australia, Central QLD
Yep picked it up on fleabay, the guy just wanted the motor for some go kart thing which just worked out for me.
Bugger.......Solid, i thought people actually built these things and now you tell me i've done my dough
Bugger.......Solid, i thought people actually built these things and now you tell me i've done my dough
if there's one thing dad likes more than serenity… it's a two stroke engine on full throttle!
Re: 1 more Aussie 09' 450R
Gravel Scratcher wrote:Santa came early.........
http://farm3.static.flickr.com/2717/405 ... c3ba9c.jpg
(sorry about the link but i'll be rooted if i could get the pic to show by itself)
Now to find the motor so i can start measuring.
Cheers
Wow that really is a nice score, just buy a CR500 and RAPE IT for the engine it will be faster than waiting for an engine to show up.
That way you will also have the exhaust, electrics and the carb to go with it.
Jack Schitt
DIE FIRST, worry about it later!
DON'T talk about it, Just DO IT!
When in doubt, GO FLAT OUT!
2001 CR500R1 - SOLD
2007 CR250R7 - SOLD
Wife and Daughter - Left Aug 17 - 2010
Jack Schitt - ??????????????
DIE FIRST, worry about it later!
DON'T talk about it, Just DO IT!
When in doubt, GO FLAT OUT!
2001 CR500R1 - SOLD
2007 CR250R7 - SOLD
Wife and Daughter - Left Aug 17 - 2010
Jack Schitt - ??????????????
I think you might be the first 09 CRF450R build in OZ.
I could be wrong , but I think Shaggy's is based on a 09 CRF 450X, a different critter entirely.
I've a mate that was going to use one of his sons 09 Rs to get me to fit his 500 engine into, but after their fraught year of dealing with a lot of issues, they seem to be fed up with Hondas, so are selling them & going to 2010 450 Yamahas. If that works out, he says he will get me to fit his 500 engine into one ( they get 2 each year, 1 practice bike one race - I will convert the race bike as the practice bikes get hammered) when they get the next years pair.
We'll see what happens, it's no skin off my nose what they roll into my workshop, but it would make an interesting conversion. I think I'll have to get pretty creative with the carb to airbox plumbing - it will make for a different, very interesting project , but we'll see what they actually end up with............................
As a side note, there may be a few 09/10 chassis around, of various brands, as whatever the cart class is that these go into (?), it's getting popular. Our local Honda dealership sold a 09 CRF450R to a fellow specifically for a cart, he then sold the rolling chassis for $6000 I think.
I could be wrong , but I think Shaggy's is based on a 09 CRF 450X, a different critter entirely.
I've a mate that was going to use one of his sons 09 Rs to get me to fit his 500 engine into, but after their fraught year of dealing with a lot of issues, they seem to be fed up with Hondas, so are selling them & going to 2010 450 Yamahas. If that works out, he says he will get me to fit his 500 engine into one ( they get 2 each year, 1 practice bike one race - I will convert the race bike as the practice bikes get hammered) when they get the next years pair.
We'll see what happens, it's no skin off my nose what they roll into my workshop, but it would make an interesting conversion. I think I'll have to get pretty creative with the carb to airbox plumbing - it will make for a different, very interesting project , but we'll see what they actually end up with............................
As a side note, there may be a few 09/10 chassis around, of various brands, as whatever the cart class is that these go into (?), it's getting popular. Our local Honda dealership sold a 09 CRF450R to a fellow specifically for a cart, he then sold the rolling chassis for $6000 I think.
- Gravel Scratcher
- Posts: 278
- Joined: September 20th, 2009, 8:45 pm
- Location: Australia, Central QLD
Man you guys are pushy
Actually have been chasing a motor for the last couple of weeks. Ended up buying a complete 97' bike for $1500 in Denver and had a mate over there rip it out and get it boxed and posted just today. Hopefully it will be on my door in the next couple of weeks. The bike even came with brand new FMF pipe and FMF gnarly chamber
Cheers
Actually have been chasing a motor for the last couple of weeks. Ended up buying a complete 97' bike for $1500 in Denver and had a mate over there rip it out and get it boxed and posted just today. Hopefully it will be on my door in the next couple of weeks. The bike even came with brand new FMF pipe and FMF gnarly chamber
Cheers
if there's one thing dad likes more than serenity… it's a two stroke engine on full throttle!
- Gravel Scratcher
- Posts: 278
- Joined: September 20th, 2009, 8:45 pm
- Location: Australia, Central QLD
- Gravel Scratcher
- Posts: 278
- Joined: September 20th, 2009, 8:45 pm
- Location: Australia, Central QLD
- DitchWitch
- Posts: 30
- Joined: November 23rd, 2009, 11:43 pm
No worries Paul, how are you going with that bloody swing arm pin?Gravel Scratcher wrote:Thanks heaps Swinney , hows that barge in the china sea going ?
The rigs having problems, had a crank case explosion 12 hours into the sail, we are down to 4 of 8 engines due to fuel contamination with growth and governer problems, working on gaining azimuth control of two of 8 thrusters and the HV boards are possessed opening by them selves, power management doesn’t know what to do, but other wise all good, I’m just putting on another pot of coffee...
So, back on subject, when do you start the frame mods? Whats the plan?
- Gravel Scratcher
- Posts: 278
- Joined: September 20th, 2009, 8:45 pm
- Location: Australia, Central QLD
swingarm arm pin, that is one sick joke.
Wil probably start to do some rough measuring etc just to get an idea of which way to go. The cradle profile is some crazy rectangle shape that i can't buy no doubt so thinking of going down the more common road of inch tube for cradle replacement. Hopefully some of the gear Shaggy used on his X might work on the R version as well. Time is a bit short at the moment and going to the coast for Chrissy so i'm just gunna have to make some time.
Wil probably start to do some rough measuring etc just to get an idea of which way to go. The cradle profile is some crazy rectangle shape that i can't buy no doubt so thinking of going down the more common road of inch tube for cradle replacement. Hopefully some of the gear Shaggy used on his X might work on the R version as well. Time is a bit short at the moment and going to the coast for Chrissy so i'm just gunna have to make some time.
if there's one thing dad likes more than serenity… it's a two stroke engine on full throttle!
- Gravel Scratcher
- Posts: 278
- Joined: September 20th, 2009, 8:45 pm
- Location: Australia, Central QLD
Well finally got this thing back on track. I get easily distracted and sort of end up playing with whatever is shiny at the time,
like road bikes other dirt bikes even threw in some racing at Finke which was my first ever proper bike race at the biggest off road event in Australia.
Only have a couple of pics at this stage, but the aim was to always look OEM with the fab work and clearances which at this stage i think has been achieved.
I know alot of people will say its only a dirt bike but i appreciate when people have pride in their workmanship.
The factory dosen't do them this good
looking down on the Y and expansion chamber
Huge thanks to Red and Kelly for getting this thing to happen.
Planning to run this at Finke this year instead of trying to kill myself on the stealy....braaaaap
like road bikes other dirt bikes even threw in some racing at Finke which was my first ever proper bike race at the biggest off road event in Australia.
Only have a couple of pics at this stage, but the aim was to always look OEM with the fab work and clearances which at this stage i think has been achieved.
I know alot of people will say its only a dirt bike but i appreciate when people have pride in their workmanship.
The factory dosen't do them this good
looking down on the Y and expansion chamber
Huge thanks to Red and Kelly for getting this thing to happen.
Planning to run this at Finke this year instead of trying to kill myself on the stealy....braaaaap
if there's one thing dad likes more than serenity… it's a two stroke engine on full throttle!
- Gravel Scratcher
- Posts: 278
- Joined: September 20th, 2009, 8:45 pm
- Location: Australia, Central QLD
exhaust FMF AF500 right length but had to rotate the pipe part for a better fit
IMG_4755
cdi mount
IMG_4764
coil mount
IMG_4767
like a bought one
IMG_4761
IMG_4759
boot from a 98-99' CR250, spacer installed and boot every so slightly touching the shock.
IMG_4762
Tiny bit of trimming for the right hand shroud
IMG_4769
Stock expansion cylinder with rear mount removed and one of the best tips i've
seen on this site is to use a clamp for rear mounting. Adjustment can be made by those 2 nuts.
IMG_4772
IMG_4774
IMG_4755
cdi mount
IMG_4764
coil mount
IMG_4767
like a bought one
IMG_4761
IMG_4759
boot from a 98-99' CR250, spacer installed and boot every so slightly touching the shock.
IMG_4762
Tiny bit of trimming for the right hand shroud
IMG_4769
Stock expansion cylinder with rear mount removed and one of the best tips i've
seen on this site is to use a clamp for rear mounting. Adjustment can be made by those 2 nuts.
IMG_4772
IMG_4774
if there's one thing dad likes more than serenity… it's a two stroke engine on full throttle!
- Gravel Scratcher
- Posts: 278
- Joined: September 20th, 2009, 8:45 pm
- Location: Australia, Central QLD
K dogg (Kelly) from this site did the billet parts and we assembled them, and when i say we i mean mostly done by a mate Mark. The Y is recessed at the joints (no butt welds) and
the reason you can't see a weld on the cradle is we went for a seamless look, i was going for the OEM look in regards to fab as much as posiible.
These pics are from K doggs build but basically mirrors mine
securedownload
securedownload-1
securedownload-2
the reason you can't see a weld on the cradle is we went for a seamless look, i was going for the OEM look in regards to fab as much as posiible.
These pics are from K doggs build but basically mirrors mine
securedownload
securedownload-1
securedownload-2
if there's one thing dad likes more than serenity… it's a two stroke engine on full throttle!
- Gravel Scratcher
- Posts: 278
- Joined: September 20th, 2009, 8:45 pm
- Location: Australia, Central QLD
Had the fuel tank off, so grabbed a couple of pics
carb alignment to boot and distance is spot on
12mm spacer between stock air box and cr250 air boot 99'
exhaust mounts in place, the rear one is a bolt on jobby while the other is welded to the sub frame. Thats a micheilin desert which at full travel does not hit the exhaust, i know cause i can see some scrape marks on the plastic under the seat area where i have bottom out and no scrapes on the exhaust
CDI and fuel petcock mount to left side of frame
billet coil holder and headstay arrangement, neat as in my opinion
carb alignment to boot and distance is spot on
12mm spacer between stock air box and cr250 air boot 99'
exhaust mounts in place, the rear one is a bolt on jobby while the other is welded to the sub frame. Thats a micheilin desert which at full travel does not hit the exhaust, i know cause i can see some scrape marks on the plastic under the seat area where i have bottom out and no scrapes on the exhaust
CDI and fuel petcock mount to left side of frame
billet coil holder and headstay arrangement, neat as in my opinion
if there's one thing dad likes more than serenity… it's a two stroke engine on full throttle!
- Gravel Scratcher
- Posts: 278
- Joined: September 20th, 2009, 8:45 pm
- Location: Australia, Central QLD
Thanks man. I had no issues with spark plug / fuel tank clearances, i swapped out the R tank for a Clarke aftermarket with holds about 12litres from memory.
After previously doing it tough on the steely at Finke i thought get the AF done and cruise on something easier, the fuckin' thing slam dunked me.
I did not ride home on day 2 which sucks balls especially when i had such a nice pony to ride. What was i thinking riding the Finke with a year number like 2013, the numbers were against me
A lot more bruising and swelling has since come out and works its way around to my groin. Sharp pain and can hardly walk has even pushed me to get some x rays.
The bike came out of it better than me, here's a couple of pics of the finished bike
After previously doing it tough on the steely at Finke i thought get the AF done and cruise on something easier, the fuckin' thing slam dunked me.
I did not ride home on day 2 which sucks balls especially when i had such a nice pony to ride. What was i thinking riding the Finke with a year number like 2013, the numbers were against me
A lot more bruising and swelling has since come out and works its way around to my groin. Sharp pain and can hardly walk has even pushed me to get some x rays.
The bike came out of it better than me, here's a couple of pics of the finished bike
if there's one thing dad likes more than serenity… it's a two stroke engine on full throttle!
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
the bike looks amazing!
the bruises
the bruises
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd