My TeemTrubble build frame #11

yota · Post by **yota** » June 30th, 2009, 4:34 pm

btw the engine just fit into the motor mounts perfect, a little friction but no resistance and the bolts slid thru like butta.

found out my 250X suspension won't work without a little effort (as i suspected). I will need a 250f or X front brake caliper (bolt spacing different on the fork) and the shock is about 3/8" longer (showa vs kayaba) so I may need the 250f linkage or parts of it.

yota · Post by **yota** » June 30th, 2009, 4:40 pm

AlisoBob wrote:I would start a new build thread..... This one is all over the fukin place.

Glad you finally got it.

lot of fill in on this thread for sure. Bob thanks for expediting.

Mad Dog · Post by **Mad Dog** » June 30th, 2009, 5:36 pm

As Stoffers would say,

yeh, Boyeeeeeee!!!!

lewisclan · Post by **lewisclan** » June 30th, 2009, 7:24 pm

dannygraves · Post by **dannygraves** » June 30th, 2009, 8:18 pm

dude, that naval jelly is some hardcore shit. as a kid my dad forgot to tell me not to touch it when he told me to clean out my go-cart gas tank... That didn't feel so good

looks very nice! keep us updated, looks like you'll have it togather in no time!

xtremeslide · Post by **xtremeslide** » June 30th, 2009, 9:59 pm

I'm glad for you yota the work looks nice,open a new thread for the complete conversion,it seems that you have a good hand with your bikes design,the Maico is awesome

Sadly i'm still waiting for a silencer 7 months later (or a kick starter)so i'm planning to do a silencer with a Coke can i'll open a thread when i'll finish the project because i have no answer for my e-mails, my Enduro CR 500 project is freeze

4Z · Post by 4Z » June 30th, 2009, 10:09 pm

I can't wait to see her assembled. Looks good!!!

Post by **AlisoBob** » June 30th, 2009, 10:17 pm

xtremeslide wrote:Sadly i'm still waiting for a silencer 7 months later i have no answer for my e-mails, my Enduro CR 500 project is freeze

That sucks.....

CR500R7 · Post by **CR500R7** » July 1st, 2009, 2:29 am

Looking good man.

racein01 · Post by **racein01** » July 1st, 2009, 4:06 am

Congrates mate...good to see its all coming together for ya project

power on.

yota · Post by **yota** » July 1st, 2009, 4:16 am

xtremeslide wrote:I'm glad for you yota the work looks nice,open a new thread for the complete conversion,it seems that you have a good hand with your bikes design,the Maico is awesome

Sadly i'm still waiting for a silencer 7 months later (or a kick starter)so i'm planning to do a silencer with a Coke can i'll open a thread when i'll finish the project because i have no answer for my e-mails, my Enduro CR 500 project is freeze

that does suck. you should send him a letter, an actual paper letter. I have his new address if you need it.

lewisclan · Post by **lewisclan** » July 1st, 2009, 5:53 am

yota wrote:
xtremeslide wrote:I'm glad for you yota the work looks nice,open a new thread for the complete conversion,it seems that you have a good hand with your bikes design,the Maico is awesome

Sadly i'm still waiting for a silencer 7 months later (or a kick starter)so i'm planning to do a silencer with a Coke can i'll open a thread when i'll finish the project because i have no answer for my e-mails, my Enduro CR 500 project is freeze
that does suck. you should send him a letter, an actual paper letter. I have his new address if you need it.

new address??

yota · Post by **yota** » July 1st, 2009, 6:00 am

he moved his shop to a new location

teem trubble mfg.
350 E Easy ST Unit 6
Simi Valley, CA 93065
805 526-5400 tel
805 526-5410 fax
email is the same

dannygraves · Post by **dannygraves** » July 1st, 2009, 7:20 am

yota, I have a couple questions... first off whts with the suspension? you keep talking about x vs r, but that frame is obviously a gen-3... gen-3 has a different shock that gen-4, the fork can interchange, but not the shock.

looking at your pics of all the parts, I see everything there except exhaust, I thought you ordered a PC exhaust from Mike too??

yota · Post by **yota** » July 1st, 2009, 9:23 am

the stock suspension is kayaba, I have 06 250X forks and shock (showa). I need to get a 250f brake caliper if I want to use the X fork and I think the X shock can be made to work with 250f linkage. The showa shock is a little bigger diameter which is no issue as I ground a scallop out of the rear of the motor like Bob did in his build thread. The problem is that the X shock is almost 1/2" longer and the bottom shackle or whatever its called rubs the linkage just opposite the rebound adjuster. looking at photos on ebay the X link looks a little shorter which would angle the shock a little more to clear. I have installed the stock kayaba stuff temporarily.

as to the pipe I am still missing a couple of things that will prevent me from finishing.

dannygraves · Post by **dannygraves** » July 1st, 2009, 10:08 am

ah, I didn't realize you started w/ a 125.

bummed about not being able to finish, hope you can resolve that soon

yota · Post by **yota** » July 1st, 2009, 10:42 am

ah no big deal, at least the bike is here so I can proceed with my work, plenty to do. Mike called me this morning, one item has shipped with a monday delivery date, he is checking on the pipe and silencer. that would be everything. I am still enthusiastic, can't wait to get home tonight and get on it.

HrcRacing · Post by **HrcRacing** » July 1st, 2009, 10:05 pm

Frame looks awesome Yota and I'm glad you're getting everything together. Looking forward to seeing the finished product!

yota · Post by **yota** » July 2nd, 2009, 11:49 am

got a lil more last night, pegs, bars, rads hung

sure you'll love this (:

deathgrips, perfect for a 500 2 stroke

Mad Dog · Post by **Mad Dog** » July 2nd, 2009, 12:14 pm

What does it say on the handlebar?

yota · Post by **yota** » July 2nd, 2009, 12:18 pm

Mad Dog wrote:What does it say on the handlebar?

guess I'll have to put a sticker over that huh? Had it laying on a shelf.

dannygraves · Post by **dannygraves** » July 2nd, 2009, 12:59 pm

I had a set of bars just like that, but couldn't make myself install them

HrcRacing · Post by **HrcRacing** » July 2nd, 2009, 2:06 pm

My bad if you've already answered this in the thread but, what kind of forks are you running? Why aren't you using the Showa twin chamber forks?

dannygraves · Post by **dannygraves** » July 2nd, 2009, 2:14 pm

125s use kayabas

http://www.youtube.com/user/500bigbore · Post by **Roostius_Maximus** » July 2nd, 2009, 3:38 pm

Mad Dog wrote:What does it say on the handlebar?

mine say KTM

BannedCR500Riders.com

My TeemTrubble build frame #11