My TeemTrubble build frame #11

CR500R7 · Post by **CR500R7** » June 25th, 2009, 12:27 pm

Hey Bob I have a post around here somewhere in CAPITALS and had to ask for help to find that key.

By the time someone had replyed I had already found it, must of hit it by accident.

How can quicfix500 be a guest and post

, I thought you had to be registered.

BTW he didn't seem happy did he.

yota · Post by **yota** » June 27th, 2009, 4:01 am

all my stuff is in 2 boxes shrink wrapped to a pallet and on a truck rolling thru the desert. tracking says delivery to my office on tuesday next week.

4Z · Post by 4Z » June 27th, 2009, 5:49 am

yota wrote:all my stuff is in 2 boxes shrink wrapped to a pallet and on a truck rolling thru the desert. tracking says delivery to my office on tuesday next week.

dannygraves · Post by **dannygraves** » June 27th, 2009, 7:17 am

Post by **AlisoBob** » June 27th, 2009, 9:49 am

CR500R7 wrote: How can quicfix500 be a guest and post ?

He was a member when he posted, the site acts "nice" when delete someone, and they become a "guest".

First post, all caps, bad attitude...... See-Ya Asshole.

Mik329 · Post by **Mik329** » June 27th, 2009, 11:22 am

AlisoBob wrote:
CR500R7 wrote: How can quicfix500 be a guest and post ?
He was a member when he posted, the site acts "nice" when delete someone, and they become a "guest".

First post, all caps, bad attitude...... See-Ya Asshole.

classic, this is why I prefer this board over others, no bullshit and it's nice the drama has chilled a bit too

CR500R7 · Post by **CR500R7** » June 27th, 2009, 2:47 pm

X2 Mik329 I agree with you.

Bob thanks for clearing that up.

yota

So does this mean the birth of another CR500AF.

SOON!

yota · Post by **yota** » June 28th, 2009, 5:24 pm

CR500R7 wrote:X2 Mik329 I agree with you.
Bob thanks for clearing that up.
yota

So does this mean the birth of another CR500AF. SOON!

roger. I have friday off so a couple of weeknight evenings, friday and saturday and maybe if nothing goes sideways I can ride it sunday. We need a fingers crossed emoticon. Had an all damn day rain in the woods today.

CR500R7 · Post by **CR500R7** » June 28th, 2009, 9:06 pm

Sorry I meant TTM Works CR500.

Don't want to get things confused.

honda02 · Post by **honda02** » June 28th, 2009, 9:31 pm

I know that Maico was ment to be ridden but that to nice of a clasic bike to be tearing it up I would be scared of destroying that Maico.

Plus I bet getting part for can't be easy to find either or cheep.

A old School Air Cooled bike is my nexted project.

I want a bike just like you'r Maico or Old A fire engine RED 1979 CR250 or 450 even A Husky.

I jelous of you Maico.

yota wrote:
CR500R7 wrote:X2 Mik329 I agree with you.
Bob thanks for clearing that up.
yota

So does this mean the birth of another CR500AF. SOON!
roger. I have friday off so a couple of weeknight evenings, friday and saturday and maybe if nothing goes sideways I can ride it sunday. We need a fingers crossed emoticon. Had an all damn day rain in the woods today.

yota · Post by **yota** » June 29th, 2009, 5:05 am

man I totally disagree, these things were built to be ridden, they are just machines. some of my other vintage bikes just sit mostly in my garage and it just seems wrong, should sell the damn things so the can get on a track in some ahrma events. the maico parts are still out there so that doesn't worry me.

yaya · Post by **yaya** » June 29th, 2009, 8:08 am

I agree with you Yota, ride the hell out of that thing. A lot of people would call the CR500 vintage as well.

You should post up some pictures of your other bikes. Hopefully you get your donor tomorrow and you can finally start posting your build!

yota · Post by **yota** » June 29th, 2009, 8:56 am

yaya wrote:I agree with you Yota, ride the hell out of that thing. A lot of people would call the CR500 vintage as well. You should post up some pictures of your other bikes. Hopefully you get your donor tomorrow and you can finally start posting your build!

I think I've got pics of most of them on this thread or another one. btw I saw a guy riding a very nice air cooled CR big bore (480?) yesterday.
sounded pretty bad ass.

4Z · Post by 4Z » June 29th, 2009, 2:10 pm

yota wrote:
CR500R7 wrote:X2 Mik329 I agree with you.
Bob thanks for clearing that up.
yota

So does this mean the birth of another CR500AF. SOON!
roger. I have friday off so a couple of weeknight evenings, friday and saturday and maybe if nothing goes sideways I can ride it sunday. We need a fingers crossed emoticon. Had an all damn day rain in the woods today.

cool bike!!!

yota · Post by **yota** » June 29th, 2009, 2:26 pm

thanks. I put a set of 2004 showa 49mm conventional forks on it and it goes amazingly fast in the big sand whoops here. I am haveing some trouble dialing in the jetting though since I ditched the bing carb. seems to be jetted right and then changes after 40 minutes or so of hard riding. seems to lean out.

Wheelie-Gene · Post by **Wheelie-Gene** » June 29th, 2009, 5:51 pm

Not to get off the subject here, but I can't resist chiming in.

yota wrote:
yaya wrote:I agree with you Yota, ride the hell out of that thing. A lot of people would call the CR500 vintage as well. You should post up some pictures of your other bikes. Hopefully you get your donor tomorrow and you can finally start posting your build!
I think I've got pics of most of them on this thread or another one. btw I saw a guy riding a very nice air cooled CR big bore (480?) yesterday.
sounded pretty bad ass.

So....how does that Maico compare to a 480?????

yota · Post by **yota** » June 30th, 2009, 6:00 am

I've never been on a 480. The 94 500 donor I had was better in the suspension dept than the maico.

yota · Post by **yota** » June 30th, 2009, 6:03 am

just got a call from a warehouse downtown, my stuff is there, arrived last night. they say they will get it to my office very late today or early tomorrow. I told him I would be backing my truck up to his loading dock in about 45 minutes (:

KE 336 · Post by **KE 336** » June 30th, 2009, 7:56 am

Bet you can't wait! I felt a little of your pain this past weekend.
I had every intention of having the first ride on my build this past Sunday.
Suspension guy has my forks and was waiting on one part. Was due to pick it up Saturday am and have them done and to me that afternoon. Turns out the part was wrong!

In desparation to ride as planned I pulled one of the forks off the donor 97 just to see if it might work. No such luck. OD of older forks are just slightly too large for the newer triple clamps. Hoping like hell this weekend will be the one.
Anyway, hope you get everything you expected!

dannygraves · Post by **dannygraves** » June 30th, 2009, 7:58 am

well... that was 2 hours ago, where are the pics?!

http://www.youtube.com/user/500bigbore · Post by **Roostius_Maximus** » June 30th, 2009, 10:21 am

i dont think we want to see the pics

http://www.youtube.com/user/500bigbore · Post by **Roostius_Maximus** » June 30th, 2009, 10:22 am

it'll be hard for him to take decent ones arround the woody he'll be sportin from finally getting his stuff

dannygraves · Post by **dannygraves** » June 30th, 2009, 1:30 pm

BOIOING!

where is brits vid w/ the goat, someone replace the goat with an AF frame

yota · Post by **yota** » June 30th, 2009, 4:27 pm

well I did have to work today after picking it up ya know. a good packing job.

frame from heat treat

btw weighed Mikes frame

a litle naval jelly and about an hour and a half with scotch brite and a fine stainless steel wire brush I got in the barbeque section of home depot

Mikes usual quality welding

Post by **AlisoBob** » June 30th, 2009, 4:31 pm

I would start a new build thread..... This one is all over the fukin place.

Glad you finally got it.

BannedCR500Riders.com

My TeemTrubble build frame #11