chain hookup

100hp honda · Post by **100hp honda** » April 26th, 2009, 7:57 pm

wheres cheapest place to get chains ? im thinking about DID this time around. that cheesy primary drive aint going to cut the mustard

100hp honda · Post by **100hp honda** » April 26th, 2009, 8:02 pm

one question: does all the DID chains have gold links ? i would rather have one with just black links

caseyracing222 · Post by **caseyracing222** » April 26th, 2009, 8:27 pm

100hp honda wrote:one question: does all the DID chains have gold links ? i would rather have one with just black links

not all DID chains have gold links, but if your going with DID use an x ring they rarley stretch & last longer than o ring chains

iggys-amsoil · Post by **iggys-amsoil** » April 26th, 2009, 10:53 pm

Danny had a good ebay deal for about $90 I need one too.

Paging Danny

100hp honda · Post by **100hp honda** » April 27th, 2009, 7:00 am

iggys-amsoil wrote:Danny had a good ebay deal for about $90 I need one too.

Paging Danny

$90 for what kind of chain ?

i was looking at the DID 520MX but it doesnt come in all black. black/gold or gold/gold is the only options, i still might get that one. or the 520NZ but it say its only for 250cc or smaller

, it has high tensile strenght so i dont understand the 250cc thing

iggys-amsoil · Post by **iggys-amsoil** » April 27th, 2009, 7:02 pm

The MX wear resistance is only 440. I'm lookin at the ZVM2 or the VM 4000 and 3220.

I think it was the VM for $90 he found on ebay. Guess I should go sniff one out.

I have the ERT2 on now. Another wear resistance of only 430. I wouldn't normally use that one but it was a Vet X prise so I'm using it up. Hoping to get a year out of it which is almost up. I just need it to last four more races and two practices and I'm calling it done. I've had to adjust it about every third to fourth ride. And being non O-ring, have lube it about every other time.

You really get what you pay for as chains go.

DID spec chart-> http://www.didchain.com/specs.htm

dannygraves · Post by **dannygraves** » April 28th, 2009, 8:21 am

it was the VM gold for $79 from motoxoutlet
I believe its liek $5 cheaper directly from their website.

dannygraves · Post by **dannygraves** » April 28th, 2009, 8:24 am

http://www.motoxoutlet.com/index.asp?Pa ... tegory=477

check out the new T-Ring!
that vm is what I run on all my bikes, never had an issue, never much stretching except a tiny bit from the first ride.

100hp honda · Post by **100hp honda** » April 28th, 2009, 3:58 pm

the 116 link VM on ebay is $106. ill check out dannys site

100hp honda · Post by **100hp honda** » April 28th, 2009, 4:00 pm

dannygraves wrote:http://www.motoxoutlet.com/index.asp?Pa ... tegory=477

check out the new T-Ring!
that vm is what I run on all my bikes, never had an issue, never much stretching except a tiny bit from the first ride.

sweet. there seems to be real good prices there, and its practicaly just down the road from me

iggys-amsoil · Post by **iggys-amsoil** » April 28th, 2009, 5:07 pm

dannygraves wrote:http://www.motoxoutlet.com/index.asp?Pa ... tegory=477

check out the new T-Ring!

Its a rivet master link.

But a VM can be used.

Well the VM is $1.50 in shipping ifor me if ebayed. Chain is same price ebay or there site.

100hp honda · Post by **100hp honda** » April 30th, 2009, 8:52 pm

i ordered a DID tonight. ill put the primary drive in the corner for emergency use only

BannedCR500Riders.com

chain hookup

chain hookup