Fast Truck, Poor Camerawork......

Use some common sense ....
Post Reply
User avatar
AlisoBob
"Hoon-father"
Posts: 15404
Joined: May 31st, 2007, 6:39 pm
Last active:
Location: Aliso Viejo Ca

Fast Truck, Poor Camerawork......

Post by AlisoBob »

Image
Last edited by AlisoBob on March 26th, 2009, 1:29 pm, edited 1 time in total.
User avatar
B440
Posts: 201
Joined: September 18th, 2008, 7:11 am
Last active:
Location: Thompson, CT

Post by B440 »

i used to put small tires on my cars and then I could easily bury the needle
User avatar
AlisoBob
"Hoon-father"
Posts: 15404
Joined: May 31st, 2007, 6:39 pm
Last active:
Location: Aliso Viejo Ca

Post by AlisoBob »

B440 wrote:i used to put small tires on my cars and then I could easily bury the needle
Thats because you dont own a Duramax..
fastkart
Posts: 645
Joined: November 20th, 2007, 10:06 am
Last active:

Post by fastkart »

How many rpm's was that turning? Looks like only about 2500 guessing by what I can see of where the needle should be
User avatar
B440
Posts: 201
Joined: September 18th, 2008, 7:11 am
Last active:
Location: Thompson, CT

Post by B440 »

Shouldn't that have shut the fuel off somewhere between 97-115mph?
User avatar
AlisoBob
"Hoon-father"
Posts: 15404
Joined: May 31st, 2007, 6:39 pm
Last active:
Location: Aliso Viejo Ca

Post by AlisoBob »

B440 wrote:Shouldn't that have shut the fuel off somewhere between 97-115mph?
There is no speed limiter.. unless you consider 200 mph a limiter.

http://www.pacificp.com/store/index.php ... cts_id=155


RPM was 3075 or so.... high as it would go.
User avatar
britincali
Posts: 8207
Joined: May 31st, 2007, 7:10 pm
Last active:
Location: Barstow, CA

Post by britincali »

Pttf :roll: :roll:

And thats sitting on the limiter :wink:

Image
Coolness list by 90cr500guy

Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
User avatar
AlisoBob
"Hoon-father"
Posts: 15404
Joined: May 31st, 2007, 6:39 pm
Last active:
Location: Aliso Viejo Ca

Post by AlisoBob »

It prolly got there quicker too....

I see we get our tires balanced at the same place....

:roll:
User avatar
Hellbear
Posts: 2255
Joined: June 13th, 2007, 8:14 pm
Last active:
Location: Richmond Hill, GA

Post by Hellbear »

Now this is a fast truck. :P

Image
Image
User avatar
Nodge
Posts: 527
Joined: October 31st, 2007, 6:12 pm
Last active:
Location: Saskatchatoon

Post by Nodge »

Can I play too?
Not going nearly as fast, but style points should be awarded since taking photos while riding a bike at that speed is a little more entertaining.
(and I'm just over half way to red line)

Image

Image
Yah, I'm from Saskatchetoon!

MRE 02 250/500 conversion, pulse injector, twirp porting, coolhead, MRE ignition, blah blah blah blah... www.millarengines.com
User avatar
britincali
Posts: 8207
Joined: May 31st, 2007, 7:10 pm
Last active:
Location: Barstow, CA

Post by britincali »

AlisoBob wrote:
I see we get our tires balanced at the same place....

:roll:


I think my problem is either the driveshaft or the pinion angle, Ive had 3 sets of tires on it now and all were balanced properly.


I get this really high frequency vibration after 110 or so that Ive never been able to nail down :?
Coolness list by 90cr500guy

Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
User avatar
Hellbear
Posts: 2255
Joined: June 13th, 2007, 8:14 pm
Last active:
Location: Richmond Hill, GA

Post by Hellbear »

Nodge wrote:Can I play too?
Not going nearly as fast, but style points should be awarded since taking photos while riding a bike at that speed is a little more entertaining.
(and I'm just over half way to red line)

Image

Image
Crazy mfer. Good pics though. :P
Image
User avatar
Nodge
Posts: 527
Joined: October 31st, 2007, 6:12 pm
Last active:
Location: Saskatchatoon

Post by Nodge »

Hellbear wrote:
Crazy mfer. Good pics though. :P
<----- SQUID


I get bored on long road trips.
Throttle locks are awesome. :P
When I pass harleys I usually stick my arms way up in the air,
and my feet on the signal lights like I have ape hangers and highway pegs...
"Rowing the boat" and "swimming" are other favorites of mine...
Yah, I'm from Saskatchetoon!

MRE 02 250/500 conversion, pulse injector, twirp porting, coolhead, MRE ignition, blah blah blah blah... www.millarengines.com
JBaze
Last active:

Post by JBaze »

Nodge wrote:Can I play too?
Not going nearly as fast, but style points should be awarded since taking photos while riding a bike at that speed is a little more entertaining.
(and I'm just over half way to red line)

Image

Image



Is that in KPH or MPH?
User avatar
Nodge
Posts: 527
Joined: October 31st, 2007, 6:12 pm
Last active:
Location: Saskatchatoon

Post by Nodge »

JBaze wrote: Is that in KPH or MPH?
Km/hr. That is just normal everyday cruising speed.
Somewhere around 90-100 mph. The speedo reads a little low.
Nodge wrote: Not going nearly as fast,
Yah, I'm from Saskatchetoon!

MRE 02 250/500 conversion, pulse injector, twirp porting, coolhead, MRE ignition, blah blah blah blah... www.millarengines.com
JBaze
Last active:

Post by JBaze »

The first time I crossed the border when I was a kid, I saw the sign for like 100! I thought hell I'm moving to Canada! Then in a very sort while realised, it was KPH! :evil:
User avatar
Roostius_Maximus
Site Admin
Posts: 4641
Joined: November 16th, 2007, 3:24 pm
Last active:
Location: Mt Nebo, Manitoba, Canada
Contact:

Post by Roostius_Maximus »

The speedo in my '89 chevy clocked 160kph, it had that dial style needle that let the white part carry on as another needle, I'd cut the word "fast" from a trailmaster decal that said fasten seatbelts and stuck it on the dial. If the fast needle came out u'd better put ur belts on, could get it back arround to 90, and that was with it out because of 35" bfgs.

Dammn '99 only clocks 180kph, have to refer to the gps on that one.

I couldnt get the duramax over 142mph on the gps with the 35" bfg's, hit the rev limiter.

dont trust a ford over 140kph on the guage, it starts to read more than its actually going
User avatar
Roostius_Maximus
Site Admin
Posts: 4641
Joined: November 16th, 2007, 3:24 pm
Last active:
Location: Mt Nebo, Manitoba, Canada
Contact:

Post by Roostius_Maximus »

B440 wrote:i used to put small tires on my cars and then I could easily bury the needle
thats cuz the speedo was out :roll:
User avatar
AlisoBob
"Hoon-father"
Posts: 15404
Joined: May 31st, 2007, 6:39 pm
Last active:
Location: Aliso Viejo Ca

Post by AlisoBob »

Roostius_Maximus wrote:T
I couldnt get the duramax over 142mph on the gps with the 35" bfg's, hit the rev limiter.

MPH


:shock: :shock: :shock: :shock:

It would take the entire width of Alberta to stop!
User avatar
Roostius_Maximus
Site Admin
Posts: 4641
Joined: November 16th, 2007, 3:24 pm
Last active:
Location: Mt Nebo, Manitoba, Canada
Contact:

Post by Roostius_Maximus »

u'd be surprised how good that truck stops, just dont stuff the brake too hard, shes setup for gravel roads (the rear brake bias has been adjusted so a lil stab at the brake will lock the back end up and you only steer 1/5 or so of what it'd take regular "steer it with the brakes")
You should see my 2500 6.0 stop, a friend was trying to stay with me on the hwy, his jeep cut out at 100mph and i have no limiter, so i backed it down to 80 getting towards town, then as he got close i did a lil brake check on him as he was passing me, i locked the back up and left probably 200ft skids as i shut down to the 70kph speed limit, he got a ticket a few blocks later for 90k in a50
I've never looked at the front pads, never used them. They were checked at the time i bought it for safety and were good, probably stil the same :lol:
User avatar
Roostius_Maximus
Site Admin
Posts: 4641
Joined: November 16th, 2007, 3:24 pm
Last active:
Location: Mt Nebo, Manitoba, Canada
Contact:

Post by Roostius_Maximus »

AlisoBob wrote:
Roostius_Maximus wrote:T
I couldnt get the duramax over 142mph on the gps with the 35" bfg's, hit the rev limiter.

MPH


:shock: :shock: :shock: :shock:

It would take the entire width of Alberta to stop!
hahaha, dad would be driving that thing 120m+ on the gravel

I raced this chick in a corvette on the interstate in montana as we left the fuel station, it was all good as i beat her to over 100mph, then i pushed the trans into limp mode and it hopped the back axel off the ground trying to slow down that fast, slipped it into N, reset it and got going again, we figured that trans was finished. I had a bullydog tripple dog set on the crazy larry download stacked with a powerpup under the hood set on 60hp
User avatar
AlisoBob
"Hoon-father"
Posts: 15404
Joined: May 31st, 2007, 6:39 pm
Last active:
Location: Aliso Viejo Ca

Post by AlisoBob »

Roostius_Maximus wrote:
I raced this chick in a corvette on the interstate in montana as we left the fuel station, it was all good as i beat her to over 100mph
I beat a F-250 Powerstroke the other day.... it topped out at 90 mph or so.

He rolls down the window at the next light and wants to know all about my mods....

I tell him " Blocked EGR and a tuner"....

He shouts back " No intake , no exhaust, no lift pump, no stacking!!!!???"

I says.... "Nope"


Dude bummed out.....
Post Reply