old ktm question
-
100hp honda
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
- Last active:
old ktm question
anybody know about the 540 2stroke ? was it only made '90-'91 ? what was the different between it and the 550 ? was the 540 a hunk of shit or good runner ?
It had a better motor than the CR. Transmission is said to have shifted poorly...but they didn't strike me as shifting too badly. As far as the rest of the bike I don't have much else to say? My impressions were never great. But I wouldn't have high regards for a 90-91 CR either. I know the 540 motor ran better, with some TLC I'm sure the rest of the bike would be just as good or better at some point. The 550 was the boss ride 
I give KTM a lot of credit back in the early 90s. They tried many different combinations to come up with a seriously potent open classer. They started with a 500, and with the mindset an even larger, power valved motor could be linear and user friendly they just got bigger, bigger and bigger. Until ultimately they decided it wasn't the size of the motor and how much power it could produce. Rather they could build a leathal open class machine if they built a bike that just handled better than the 500s...well that was an all too easy job.
I give KTM a lot of credit back in the early 90s. They tried many different combinations to come up with a seriously potent open classer. They started with a 500, and with the mindset an even larger, power valved motor could be linear and user friendly they just got bigger, bigger and bigger. Until ultimately they decided it wasn't the size of the motor and how much power it could produce. Rather they could build a leathal open class machine if they built a bike that just handled better than the 500s...well that was an all too easy job.
'03 CR500 powered by...umm...a new motor?
-
JBaze
- Last active:
-
100hp honda
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
- Last active:
-
100hp honda
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
- Last active:
-
JBaze
- Last active:
- xtremeslide
- Posts: 766
- Joined: December 14th, 2008, 10:25 am
- Last active:
- Location: Mediterranean coast
100hp honda wrote:ya ill passMICK wrote:I think it would be wise to pass.... tranny on ebay is $500, not including forks or drum
Good idea,there's no spares for that bikes or expensive and very hard to find,i saw a couple of years ago a 300 two stroke 91 very cheap almost a gift,to restore it and was unable to find the half of the pieces that it need,so i didn't buy it
I should bought it and sell by parts
CR500R
V-MAX 1200
V-MAX 1200
- Dakota Boy
- Posts: 81
- Joined: May 17th, 2008, 6:19 pm
- Last active:
-
100hp honda
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
- Last active:
-
JBaze
- Last active:
- xtremeslide
- Posts: 766
- Joined: December 14th, 2008, 10:25 am
- Last active:
- Location: Mediterranean coast
The 540 made 68hp. The 550 gained 500 rpm and produced another 4 horsepower. I can't remember if that was stock or piped? I grew up with the owners of my town's only KTM dealership. They were really into big bores. They used to have competitions that would give prizes to anybody who could build a naturally aspirated straight fuel dirt bike to produce more power than a KTM. I don't think KTM ever lost?
'03 CR500 powered by...umm...a new motor?
-
100hp honda
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
- Last active:
$700obo is what the dude wants but it looks that it sat in a shed for alot of years so im sure he would settle for $400 just to get rid of it. he said it used to run decent but that was almosy a year ago. i was kicking around the idea, even if it was a pile of shit i could always sell the parts on ebay but i dont know if i want to hassle with it. it would be a fun as hell to mess around withJBaze wrote:How much can you pick it up for? If it's cheap enough why not go for it. If nothing else it's something more to play around with.
-
JBaze
- Last active:
-
100hp honda
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
- Last active:
- dannygraves
- Posts: 8020
- Joined: June 1st, 2007, 2:03 pm
- Last active:
- Location: Las Vegas, NV
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Last active:
- Location: Mt Nebo, Manitoba, Canada
- Contact:
Danny, I've got THEE ktm guys in Canada tryin to hook me up with such a chassis, aint happening. Closest i got was a chance to part a new bike with the KTM Canada team that wanted a spare engine for the trailer, before the deal was done by the campfire the wheels, suspension, seat and engine were gone, and i would have had to pay 600 for the rest, NFL! We just got another 450 bike tho 2 weeks ago, it was new, never run but "used" cuz it had been assembled for magazine photo shoots and a dammn nice deal. Its just the home/practice bike.
theres a palletbox of new plastics, bars, "shipping tires" and shit in the garage waiting to be plundered
theres a palletbox of new plastics, bars, "shipping tires" and shit in the garage waiting to be plundered
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd

My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd

- dannygraves
- Posts: 8020
- Joined: June 1st, 2007, 2:03 pm
- Last active:
- Location: Las Vegas, NV
I almost bought that '06 ktm 450sx with a messed up crank for $1500 but after I thought about it for a week it was been taken earlier in the day when I finally called him
I just think it would be cool to do a ktm550 conversion, kx500a/f and have my cr500a/fs it would make a sweet collection
I just think it would be cool to do a ktm550 conversion, kx500a/f and have my cr500a/fs it would make a sweet collection
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80

Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80

- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Last active:
- Location: Mt Nebo, Manitoba, Canada
- Contact:
that would be a nice fleet
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd

My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd

- dannygraves
- Posts: 8020
- Joined: June 1st, 2007, 2:03 pm
- Last active:
- Location: Las Vegas, NV
- dannygraves
- Posts: 8020
- Joined: June 1st, 2007, 2:03 pm
- Last active:
- Location: Las Vegas, NV
yeah, rode the gen-4. My ass still hurts from that seat
and 13/48 gearing on the close ratio trans gets me a shitty top speed, I was in 5th A LOT, which I wasn't expecting.
the gen-3 needs a pile of new OEM stuff for the motor, I'm not half assing this one. I need 1 trans gear, a new crank, all the bearings and seals and some other goodies, but the chassis is ready to go and just waiting for that bailey kit to go on
Still need a desert tank and handle bars, but have old bars and the stock tank it could roll with for a while.
the gen-3 needs a pile of new OEM stuff for the motor, I'm not half assing this one. I need 1 trans gear, a new crank, all the bearings and seals and some other goodies, but the chassis is ready to go and just waiting for that bailey kit to go on
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80

Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80

- dannygraves
- Posts: 8020
- Joined: June 1st, 2007, 2:03 pm
- Last active:
- Location: Las Vegas, NV
the gen-1 is stricktly a dunes bike now. the gen-4 did well in the dunes, but I got a pinch flat early one and kept wondering why it was turning like shit 
I do think the gen-3 will become my all the time bike even in the dunes and the gen-1 will probably just be for hill shooting. if thats the case then the gen-4 will be sold to pay for swingarm extensions and nitrous for the gen-1 and other goodies for the gen-3.
I do think the gen-3 will become my all the time bike even in the dunes and the gen-1 will probably just be for hill shooting. if thats the case then the gen-4 will be sold to pay for swingarm extensions and nitrous for the gen-1 and other goodies for the gen-3.
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80

Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80



