Fast.....fast....fast.

Post by **AlisoBob** » October 27th, 2008, 7:18 pm

BUDDFAB STREAMLINER World’s fastest 50cc and 100cc motorcycle.
On the opening day, Sept 2, of the 2008 International Motorcycle Speed Trials by BUB held on the Bonneville Salt Flats in Utah, John Buddenbaum of Sunnyvale California piloted the Buddfab Motorcycle Streamliner to a two way; flying start; one mile average speed of 144.966mph (233.300 km/h). This performance exceeded Jan Huberts’ Kreidler powered streamliner’s 1981 FIM record by over 5mph. The team used a turbocharged fuel burning 50cc Aprilia RS50 (Moto Minarelli AM6) modified with Metrakit pro race engine parts.
Later at that same meet; Eric Noyes also of Sunnyvale California; drove the streamliner with a naturally aspirated CR80 Honda engine in the 100cc class to a two way one mile average speed of 151.425mph (243.695 km/h) beating Jack Costella’s 2004 Nebulous 4 streamliner record by over 10mph. Both records surpass the performance of any engine configuration in their respective displacement class at any officially timed event.
FIM World Records are awaiting certification of the paperwork.

How fast could this go, CR500 powered???

teemtrubble · Post by **teemtrubble** » October 27th, 2008, 8:03 pm

pstoffers · Post by **pstoffers** » October 27th, 2008, 8:16 pm

Nodge · Post by **Nodge** » October 28th, 2008, 12:24 am

How fast will it go with a 500 conversion?

lewisclan · Post by **lewisclan** » October 28th, 2008, 6:57 am

Wow thats way cool

TYSTYX · Post by **TYSTYX** » October 28th, 2008, 11:07 am

Cool.

"SOLID Bro!!" · Post by **"SOLID Bro!!"** » October 28th, 2008, 12:15 pm

lets build one!!

Whats up with the Eagle logo being backwards on the front tire?

Post by **AlisoBob** » October 28th, 2008, 2:41 pm

That would be so cool!

We have the driver.....

Post by **AlisoBob** » October 28th, 2008, 2:42 pm

[quote=""SOLID", Bro!"]
Whats up with the Eagle logo being backwards on the front tire?[/quote]

They "flipped" the image, to point it to the left.

teemtrubble · Post by **teemtrubble** » October 28th, 2008, 2:44 pm

hmmmmm

"SOLID Bro!!" · Post by **"SOLID Bro!!"** » October 28th, 2008, 2:52 pm

I'm thinking NO!!

All the other graphics would be backwards.

Nice try tho !

Post by **AlisoBob** » October 28th, 2008, 3:06 pm

The "chassis" photo obviously had the "shell" photo overlaid onto it.... as the shell photo was taken facing left....

"SOLID Bro!!" · Post by **"SOLID Bro!!"** » October 28th, 2008, 3:08 pm

Mike you do the machining shtuff I'll do the tube work.

And a lot of donations and donated time/parts

Robbie Peterson can drive it.

I bet over 200mph

I have a 500cc Single cylinder GM motor on meth
this pile will flippin fly.

Post by **AlisoBob** » October 28th, 2008, 3:10 pm

I can do the body.

"SOLID Bro!!" · Post by **"SOLID Bro!!"** » October 28th, 2008, 3:13 pm

Out of wood?

Or Foam?

britincali · Post by **britincali** » October 28th, 2008, 3:17 pm

[quote=""SOLID", Bro!"]
I have a 500cc Single cylinder GM motor on meth
this pile will flippin fly.[/quote]

If your gonna do it at least use a CR motor......

I wonder what top end 15/20 sprockets would get ya

Post by **AlisoBob** » October 28th, 2008, 3:34 pm

Not nearly fast enough.... needs a 2x tranny set up.

britincali · Post by **britincali** » October 28th, 2008, 3:41 pm

Ok then 15 tooth to a 10 tooth linked to a 20 rear

"SOLID Bro!!" · Post by **"SOLID Bro!!"** » October 28th, 2008, 3:48 pm

It's just what I have laying around.

Its a speedway motor tons of torque

Up to 10,000 or 11,000 rpm

With 2 speed external gear box

BannedCR500Riders.com

Fast.....fast....fast.

Fast.....fast....fast.