Stator and Clutch Covers

ShanMan · Post by **ShanMan** » August 26th, 2008, 9:27 pm

OK boys, here are the finished clutch covers. Two of the "CR500 1/2 LITER THUMPER EATER" covers are going straight to Jay Lewis, and one of the blanks is going TTM Mike. So, that means there are two of the ones like Jay's, two that read "BANNED CR500 RIDERS" and one blank that could be customized by me (at your expense) or you that are up for grabs.

Remember, clutch side is $150 plus shipping.

I hope you guys like them!

FYI: i am hoping you guys here on the site will grab the BANNED ones...and if need be, I will sell the others elsewhere.

lewisclan · Post by **lewisclan** » August 27th, 2008, 2:28 pm

those look awesome

dannygraves · Post by **dannygraves** » August 27th, 2008, 2:32 pm

man, this sucks, I'm a little tight on money right now... Hopefully you still have some when I get the house situation figured out.

iggys-amsoil · Post by **iggys-amsoil** » August 27th, 2008, 5:36 pm

Just like the Gen 1 kits, your not going to have any problem selling those. I'd make another set.

sabreguy · Post by **sabreguy** » August 27th, 2008, 7:15 pm

Once I get some extra $ I am getting me a set of those.

Anybody want to buy me a early Christmas gift

dannygraves · Post by **dannygraves** » August 27th, 2008, 8:01 pm

my biggest problem is I can't buy just 1, that would be lame, the clutch and stator side need to match... the of coarse my 2 bikes would have to match, with means antoher set... Hopefully there are 2 sets availabe when I sell my gen-1.
so, it is settled, when I sell my gen-1 its 2 cover sets and a TIG welder!

Post by **AlisoBob** » August 27th, 2008, 8:31 pm

I'm digging the " Penthouse" lens.....

lewisclan · Post by **lewisclan** » August 29th, 2008, 3:11 pm

just got em ............. they are fricken BITCHEN.
Great craftmanship Shanman. Id buy them all if I had the $$ .
way better than I was hoping for .
thanks
Jay

ShanMan · Post by **ShanMan** » August 30th, 2008, 9:33 am

Glad you like them Jay. I think they look pretty good too, and there are none other like them anywhere, which is kinda cool.

ShanMan · Post by **ShanMan** » September 1st, 2008, 3:35 pm

ALL: my prices are good for continental US destinations only. If you are in Europe, Canada or Australia, YOU WILL be paying more for shipping. Sorry.

jbird_710 · Post by **jbird_710** » September 10th, 2008, 4:34 pm

What do have left? I'd like a set of both ignition and clutch - prefer the Banned CR500 Riders, but not that picky. I just want to replace the SH covers I have. Send me a PM or email to jbird710@yahoo.com with total price and how you want to be paid.

Thanks,

Jay

eyesky2002 · Post by **eyesky2002** » October 5th, 2008, 12:27 pm

What if any are left? Also my shifter and brake lever are mm's away from the stock covers; how do these fit compaired to stock?

eyesky2002 · Post by **eyesky2002** » October 9th, 2008, 10:50 am

I am guessing none are left?

ShanMan · Post by **ShanMan** » October 28th, 2008, 11:57 am

I have one clutch cover left and several ignition covers left. I may also have one blank clutch cover which can be machined to either style, or at your cost, perhaps fully customized to your specification.

teemtrubble · Post by **teemtrubble** » October 28th, 2008, 1:04 pm

I'll take the other blank clutch cover Shannon 805 306-9840

ShanMan · Post by **ShanMan** » October 28th, 2008, 2:03 pm

Hey Mike, if you want it, just shoot me a PayPal payment and I'll ship it ASAP. I need to send Aliso his covers too, so maybe you guys can do a package apyment and I can ship them all at once?

ShanMan · Post by **ShanMan** » November 21st, 2008, 6:26 am

Well, time for a holiday special:

I have six IGNITION covers left, and they need to find good homes. That said, I'll take $125 plus shipping (approx. $12) for each. When they are gone, they are gone. FYI: if you are paying with PayPal, please add 2% to the total.

Also, Bobby...you still want yours, better let me know. Also also, Mike, if you want that blank cover shoot me $125 ASAP and it's yours.

I want all this stuff gone fellas, so please help me out here!

FYI to all: I still have about six gen. one kits and tons of engine mounts (pairs) available. I have a final run of 10 gen three headstays in the works, but my machinist has been very busy of late. They are coming though.

Redness · Post by **Redness** » December 5th, 2008, 1:08 pm

If there are any covers left sign me up those things are SICKKKKKKKK one ignition and one clutch

ShanMan · Post by **ShanMan** » December 12th, 2008, 9:30 am

one set of each style BANNED or 1/2 LITER clutch side...the blank one I had is long gone. Bear in mind that each set has the same 1/2 LITER style ignition cover....we only did one script setup on that cover. I think I have six ignition covers left. I am letting those go for $125 each now while supplies last.

kdizzle · Post by **kdizzle** » April 28th, 2009, 4:23 pm

i kjnow im late toi the party.. but i sure wish i could get my hands on a blank clutch and ignition cover. please let me know!
speeding78@gmail.com

Bean · Post by **Bean** » May 21st, 2009, 3:02 am

Shanman
Do you have any blank cover sets left.
If not how many orders of blanks would you need to do a run of them.
thanks Shaggy aus

ktm 620 · Post by **ktm 620** » May 29th, 2009, 3:32 am

any works honda clutch cover and ignition covers how much shipt to the uk

2strokes4ever · Post by **2strokes4ever** » June 4th, 2009, 1:40 am

Yeah, id go bare finish, i hate bling bits that wear away

dubious01 · Post by **dubious01** » May 19th, 2010, 8:45 am

Is anyone planning to ever make these again?
if not I have a friend with a CNC, training the new operator, and he will make them for us on the cheap,
all I need is the CNC program if anyone is willing to divulge?

2strokes4ever · Post by **2strokes4ever** » May 21st, 2010, 2:20 pm

Well can we get these in Australia, i will pay for 2 sets straight up

BannedCR500Riders.com

Stator and Clutch Covers

works honda cove