NEEDED: 86 or 87 CR500 4th mainshaft gear (22T) PLEASE!!!

450kller · Post by **450kller** » August 21st, 2008, 9:42 am

If anyone has a good condition 4th mainshaft gear for an 87 CR500 for sale I would be interested in buying it. The part number is 23461-ML3-000.

I am being told that an 86 motor uses the same gear.

This for my supermoto build and I can't go any further with the build until I find this gear...

Any help would be great!!

Thanks in advance,

teemtrubble · Post by **teemtrubble** » August 21st, 2008, 10:07 am

I already said on Trace's site to send me a picture of what you need to mike@fachar-sons.com

100hp honda · Post by **100hp honda** » August 22nd, 2008, 4:29 pm

you might be able to buy new one from HPD if you cant find used

nmdesertrider · Post by **nmdesertrider** » August 22nd, 2008, 6:07 pm

can't you use a new gear from 93+ ?

100hp honda · Post by **100hp honda** » August 23rd, 2008, 5:34 pm

the '93+ is 22t but i dont think it will work

'86-'87 4th ratio: .954

'93-'01 4th ratio: .955

450kller · Post by **450kller** » August 25th, 2008, 8:47 am

I have looked it up both on this site and cr500riders.com. This particular gear has the same part number only for years 86 and 87. All the other years have different part numbers.

dannygraves · Post by **dannygraves** » August 25th, 2008, 10:02 am

the '88+ gears were wider, you can use a '93+ but have to machine it down .020... eff that. You try ordering that part #?

100hp honda · Post by **100hp honda** » August 25th, 2008, 10:45 am

dannygraves wrote:you can use a '93+ but have to machine it down .020... eff that.

'86-'87 4th ratio= .954

'93+ 4th ratio= .955

they both use 22t gear but ratio isnt the same. how you figure it will work ?

kkvslayer · Post by **kkvslayer** » August 28th, 2008, 5:31 am

450kller wrote:If anyone has a good condition 4th mainshaft gear for an 87 CR500 for sale I would be interested in buying it. The part number is 23461-ML3-000.

I am being told that an 86 motor uses the same gear.

This for my supermoto build and I can't go any further with the build until I find this gear...

Any help would be great!!

Thanks in advance,

I just bought my old 86 back from my buddy last night it has a 85 tranny in it,there is a complete 86 tranny that needs m3rd & m5th in the box of spare parts with the bike but he never brought the box last night,I'll tell him to bring it to me after work tonight and get you some pics of the gear your needing

kkvslayer · Post by **kkvslayer** » September 7th, 2008, 5:44 am

I took pictures of both 4th's,I couldn't remember which one you needed,its the one on the top,it has very little wear,no chips off the dogs or teeth,$25.00 shipped

450kller · Post by **450kller** » October 9th, 2008, 9:08 am

kkvslayer,
I sent you a PM!!!!

BannedCR500Riders.com

NEEDED: 86 or 87 CR500 4th mainshaft gear (22T) PLEASE!!!

NEEDED: 86 or 87 CR500 4th mainshaft gear (22T) PLEASE!!!

Re: NEEDED: 86 or 87 CR500 4th mainshaft gear (22T) PLEASE!!