Wont fire.....

britincali · Post by **britincali** » August 5th, 2007, 11:01 pm

Copied from another thread to clean things up, basically bike has been running horrible last 3 times out, the last 2 it wont even open up.....

Posted: Sun Aug 05, 2007 8:00 pm Post subject:

--------------------------------------------------------------------------------

It wasn't the problem...... I took it out today and still doing the same thing.

I pulled everything off and found one of the connectors to the stupid roost boost hanging off. I pulled the RB and threw it, reconnected the original wires and siliconed them.

Now it wont fire, I pulled the plug and its spotless with a nice fat blue spark.

Still wont fire....

I gave up and am having a beer.

I went back at it with the neighbour. kicked until blue in the face and nothing. swapped another brand new plug in and kicked until sore...... nothing. Pulled mag cover and flywheel nut, woodruffkey is not sheared and in good shape.

Kicked kicked kicked kicked.... nothing

pulled reed cage..... good.

So far I have this for symptoms

1. idled fine but would not open up
2. moved mag wires a little and it dies and wont fire
3. check all wiring and find roost boost wire hanging off.... throw roost boost in trash
4. great fat blue spark and coil OHMs out ok
5. plug is wet when remove so have fuel
6. pulled mag cover nothing leaking dry as a bone and nothing sheared,timing looks good
7. compression hurts my foot like a mofo (limping now)
8. reeds are perfect
9.................... still wont fukin start!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1

not even a Pffffft half ass fire.................... Im angry now.

Any input would be greatly appreciated as Im out of ideas now...........

Ported&Polished · Post by **Ported&Polished** » August 5th, 2007, 11:34 pm

try swapping parts from the other bike until it runs.

britincali · Post by **britincali** » August 5th, 2007, 11:37 pm

Ported&Polished wrote:try swapping parts from the other bike until it runs.

Why would it not run now tho? I dont want to start cannibalising my perfect runner.

Ported&Polished · Post by **Ported&Polished** » August 5th, 2007, 11:49 pm

Well, I'd just go for the easy stuff. Carb, then ignition. If it's something else after that, at least you ruled out the two big probabilities.

lewisclan · Post by **lewisclan** » August 6th, 2007, 5:56 am

Ill be over to pick up my new bike just leve it alone

lewisclan · Post by **lewisclan** » August 6th, 2007, 5:58 am

britincali wrote:

Any input would be greatly appreciated as Im out of ideas now...........

what do you want for it

britincali · Post by **britincali** » August 6th, 2007, 8:00 am

lewisclan wrote:
britincali wrote:

Any input would be greatly appreciated as Im out of ideas now...........
what do you want for it

lewisclan · Post by **lewisclan** » August 6th, 2007, 8:10 am

That hurts me to think that you realy feel that way

lewisclan · Post by **lewisclan** » August 6th, 2007, 8:12 am

bring it over this weekend and we will get er running & then ride

britincali · Post by **britincali** » August 6th, 2007, 8:26 am

lewisclan wrote:bring it over this weekend and we will get er running & then ride

I just wanna set fire to it rite now................

lewisclan · Post by **lewisclan** » August 6th, 2007, 8:29 am

ok then bring it over and Ill give you a good running 500 for it

britincali · Post by **britincali** » August 6th, 2007, 8:33 am

lewisclan wrote:ok then bring it over and Ill give you a good running 500 for it

You wanna come over to mine and have a C-12 BBQ?

lewisclan · Post by **lewisclan** » August 6th, 2007, 8:35 am

nope. but if you need to switch stuff out & around to findout whats wrong I have every part you would need completely

britincali · Post by **britincali** » August 6th, 2007, 8:38 am

Im gonna have at it this afternoon, im beginning to think the bottom end is full of gas or something.

lewisclan · Post by **lewisclan** » August 6th, 2007, 9:17 am

check your pipe to

britincali · Post by **britincali** » August 6th, 2007, 9:18 am

lewisclan wrote:check your pipe to

On it good sir

Post by **AlisoBob** » August 6th, 2007, 9:20 am

Should I come over?

britincali · Post by **britincali** » August 6th, 2007, 9:24 am

AlisoBob wrote:Should I come over?

If you fancy a drive to barstow you are more than welcome, I get off at 2pm

lewisclan · Post by **lewisclan** » August 6th, 2007, 9:33 am

NOW I AM REALLY HURT Brit has never invited me over

britincali · Post by **britincali** » August 6th, 2007, 9:34 am

lewisclan wrote:NOW I AM REALLY HURT Brit has never invited me over

You dont get to come, we dont allow yucca valley this upmarket town

Ported&Polished · Post by **Ported&Polished** » August 6th, 2007, 9:40 am

lewisclan wrote:check your pipe to

That's the whole problem, he keeps "checking" his pipe before he works on his bike. Put the pipe down, then go work on it.

lewisclan · Post by **lewisclan** » August 6th, 2007, 9:41 am

Ok then...... Ill go hang out with Rabbit he even said he would have cold beer that I could watch him drink if I helped him work on his bike

britincali · Post by **britincali** » August 6th, 2007, 10:01 am

lewisclan wrote:Ok then...... Ill go hang out with Rabbit he even said he would have cold beer that I could watch him drink if I helped him work on his bike

britincali · Post by **britincali** » August 6th, 2007, 10:01 am

Ported&Polished wrote:
lewisclan wrote:check your pipe to
That's the whole problem, he keeps "checking" his pipe before he works on his bike. Put the pipe down, then go work on it.

britincali · Post by **britincali** » August 6th, 2007, 10:04 am

Thanks for the tip bob!

BannedCR500Riders.com

Wont fire.....

Wont fire.....

Re: Wont fire.....

Re: Wont fire.....