go ahead have fun with this(mike)

aloha450x · Post by **aloha450x** » June 22nd, 2008, 7:47 pm

ok when i took my motor apart for some bullshit powdercoating. i was tapping on the crank rod to get it loose. anyway putting it back together and discovered while putting the gear that spins the waterpump that i had bent it a little. it tried to get the gear on but no go. it might with some needle files and some love but i dont want any unballanced stuff in there. my question is where to get a crank assy. i guess i cant really expect to attemp a job like this for the first time and not fuck something up. just so happens it the most expensive shit i could fuck up in there. go figure. the sad part is i know better than to hit threads or grooved gears like that. im a fucking tard. haha

sabreguy · Post by **sabreguy** » June 22nd, 2008, 8:13 pm

100hp honda · Post by **100hp honda** » June 22nd, 2008, 9:13 pm

aloha450x · Post by **aloha450x** » June 22nd, 2008, 9:24 pm

haha

aloha450x · Post by **aloha450x** » June 23rd, 2008, 9:58 am

does amybody know how much the crank assy weigh. curious for shipping purposes.

teemtrubble · Post by **teemtrubble** » June 23rd, 2008, 10:49 am

I wouldn't make fun of you at a sensitve moment like this...

I'm gonna make fun of when you drink Vodka how retarded you can be! hahahahahaha

Perfect example look at Brit!

pimp559 · Post by **pimp559** » June 23rd, 2008, 10:55 am

Are just the threads messed up? Can you post a pic?

teemtrubble · Post by **teemtrubble** » June 23rd, 2008, 11:04 am

Let him suffer dude! hahahahaha

aloha450x · Post by **aloha450x** » June 23rd, 2008, 11:46 am

awe come on that's not nice. make me suffer. and pimp its the spline side. and the end is mushroomed just enough not to let the gear go on. but when I took it out I jacked it even more. I can post pics tonight if needed.

teemtrubble · Post by **teemtrubble** » June 23rd, 2008, 11:58 am

I'm holding out for a goody bag! hahahaha I'll slit it with you pimp!

aloha450x · Post by **aloha450x** » June 23rd, 2008, 12:06 pm

fuckers!! haha where is the goodie bag going

dannygraves · Post by **dannygraves** » June 23rd, 2008, 12:08 pm

dude, where are the pics of the crank damage?!
you can probably fix it...

teemtrubble · Post by **teemtrubble** » June 23rd, 2008, 12:09 pm

fuker Danny no "szalauna" for you

dannygraves · Post by **dannygraves** » June 23rd, 2008, 12:15 pm

hey, its not my fault if I got the cheap and resourceful part of being hungarian as well!!!

teemtrubble · Post by **teemtrubble** » June 23rd, 2008, 12:21 pm

Let me see if I work this right we'll get a goody bag and szalauna and a picture of Franks coozie cup.

dannygraves · Post by **dannygraves** » June 23rd, 2008, 12:23 pm

well, he already sent me a water elbow for my gen-4... but I guess I can hold out for a goodie bag as well...

teemtrubble · Post by **teemtrubble** » June 23rd, 2008, 12:42 pm

This is one of those

! moments my friend Frank here works on Aircraft yes the type you pay to fly on so he knows damn well not to put a hammer to a crank assembly to take it a part! but, then again most of us wouldn't take pain killers and drink Vodka while splitting the cases for the first time.. except Brit of course. Alright I had my fun. hahahaha!

Ok post those pic's bro.

aloha450x · Post by **aloha450x** » June 23rd, 2008, 12:54 pm

damm salt in the wound huh. karma is a bitch fackers. haha ok moving on where is the best place to get a crank? I know better than this. I need aframe too if anyone sees one let me know. haha

dannygraves · Post by **dannygraves** » June 23rd, 2008, 12:55 pm

read my last post here
http://bannedcr500riders.com/board/viewtopic.php?t=3172

teemtrubble · Post by **teemtrubble** » June 23rd, 2008, 1:11 pm

aloha450x wrote:damm salt in the wound huh. karma is a bitch fackers. haha ok moving on where is the best place to get a crank? I know better than this. I need aframe too if anyone sees one let me know. haha

It's "Fachar" not "Facker"

aloha450x · Post by **aloha450x** » June 23rd, 2008, 2:08 pm

well I guess I deserve this. huh you guys check out the 88,89 crank on hondapartsdirect. 222.17 what is strange is that it is wayyyyy cheaper to buy th4e whole assy than just what you need. check it out and let me know what ya think

aloha450x · Post by **aloha450x** » June 23rd, 2008, 10:21 pm

aloha450x · Post by **aloha450x** » June 23rd, 2008, 10:21 pm

teemtrubble · Post by **teemtrubble** » June 24th, 2008, 7:27 am

I think it's fixable...maybe

dannygraves · Post by **dannygraves** » June 24th, 2008, 7:52 am

I think so too, but....... WTF DID YOU DOOO!!?!?!?!
for future reference, IF you ever HAVE to bang on a splined or threaded shaft, either use a soft block in between, like a scrap block of aluminum, or find a deep socket that will fit over it and contact at the base.. that sucks dude!
Id just take the grinder to the flared part until it fits.

BannedCR500Riders.com

go ahead have fun with this(mike)

go ahead have fun with this(mike)