needle question

100hp honda · Post by **100hp honda** » May 29th, 2008, 4:52 pm

anybody tried a leaner than stock needle CGL (1370n) or CEL (1370j) ? how did it work ? im thinking of trying one to see what happens, since im above 6000ft

Post by **AlisoBob** » May 29th, 2008, 4:57 pm

1372 I run for fun ( GREAT mileage)

1472 I run most of the time.

Bottom end is real snappy....

100hp honda · Post by **100hp honda** » May 29th, 2008, 5:14 pm

AlisoBob wrote:1372 I run for fun ( GREAT mileage)

1472 I run most of the time.

Bottom end is real snappy....

cool. was that 1372 needle used in another bike and available from a honda dealer? im also thinking a 1370 needle if thats available too

iggys-amsoil · Post by **iggys-amsoil** » May 29th, 2008, 6:06 pm

There available from the dealer, but the squids don't do much without a part #

Better to you sudco.com

ou812 · Post by **ou812** » May 29th, 2008, 6:13 pm

1472 I run most of the time.

Bottom end is real snappy....

yep

100hp honda · Post by **100hp honda** » May 29th, 2008, 6:40 pm

iggys-amsoil wrote:There available from the dealer, but the squids don't do much without a part #

Better to you sudco.com

i dealt with sudco a few times- good people. only problem is they have minimum of 5 needle purchase. do you have the part number for 1372 needle, then i can buy just 1 from the dealer?

100hp honda · Post by **100hp honda** » May 29th, 2008, 6:47 pm

R1372N or R1370N

anybody have a part number for either of these needles ?

Post by **AlisoBob** » May 29th, 2008, 7:21 pm

http://www.bannedcr500riders.com/board/ ... sc&start=6

pstoffers · Post by **pstoffers** » May 29th, 2008, 7:53 pm

AlisoBob wrote:http://www.bannedcr500riders.com/board/ ... sc&start=6

dannygraves · Post by **dannygraves** » May 29th, 2008, 9:10 pm

dude, I've ordered single needles from sudco, the 5 thing is for jets.
CGN is a 1372 DGN is a 1472 I think 1370 is CGL, might be CGM, can't remember.
sudco goes by the letter system.

100hp honda · Post by **100hp honda** » May 29th, 2008, 9:25 pm

no way dude, they made me order 5 needles. trust me, i still have 4 collecting dust in the bags. but ill call and talk to john and see what he says

iggys-amsoil · Post by **iggys-amsoil** » May 29th, 2008, 10:06 pm

I think if you goto bikebandit or mrcycles.com look at 03 cr's. There's only a couple of years that have dif needle/pn#s. I'm pretty such it was 03 125 that I found the pn for a 1468 or 67? Which turned out to be no good cause I needed a 2067 or EEH.

Apollo · Post by **Apollo** » May 31st, 2008, 10:19 am

A couple of months ago, Sudco made me buy at least 5 needles. The 1370 needle is indeed a CGL. It was too lean for me so I went to a richer CGK (1369) and have since been real happy with the DGK (1469). I did go to a 52 pilot from a 55 after the swtich to the DGK needle. That is real crisp for me. It is a trip how the CGL was to lean at 1/4 throttle with the 55 pilot, and the DGK (middle clip) with the 52 is perfect. My carb is new 39PK, Gorr all around power porting, and a Rad valve with FMF pipe. I am at 670 feet in elevation. I am running a 172 main as well.

Post by **AlisoBob** » May 31st, 2008, 10:57 am

This is the last time I'm mentioning this, as no one seems to read ......

Talk to John, or Kenny...

Mention the site....

They will do back flips for you.

The deals they extend to US for 39mm PWK's, and 38mm Air Strikers will blow you away.

Sudco rules!!!

dannygraves · Post by **dannygraves** » May 31st, 2008, 11:39 am

dude, even before the site deal, I used to call John and ask all sorts of weird shat and order all sorts of weird parts and they never gave me a 5 min. issue with anything. Of coarse I've made a large number of small orders, but either way I am still a returning customer!
Now I never ordered just a needle, I've orderd a needle, a gasket, and idel screw, etc. in one order, so maybe the #5 rule only applies if you don't order anything else.
Now that they know us from the site, I don't think the rule of 5 will apply to us anymore

dannygraves · Post by **dannygraves** » May 31st, 2008, 11:42 am

actually I did only order a needle once and I called John and asked him what the stock jetting was for the tm pro 41 and he went all the way to the back to dig it up, then all I ordered was the needle (fj41) and he even included a free catalog and 4 big sudco stickers! Top notch guys!

100hp honda · Post by **100hp honda** » May 31st, 2008, 11:51 am

AlisoBob wrote:This is the last time I'm mentioning this, as no one seems to read ......

Talk to John, or Kenny...

Mention the site....

They will do back flips for you.

The deals they extend to US for 39mm PWK's, and 38mm Air Strikers will blow you away.

Sudco rules!!!

10-4 rubber duck...i read you loud and clear

. i need 2 needles and 1 52 pilot jet- im calling john first thing monday. ill say BIG bob sent me

Apollo · Post by **Apollo** » May 31st, 2008, 4:23 pm

I remember what it is now, it is the fact that there is a 25 dollar minimum per order. Next time I will mention the site and I bet he will go less than the minimum no problom.

pstoffers · Post by **pstoffers** » May 31st, 2008, 8:22 pm

There is a $25 minimum

100hp honda · Post by **100hp honda** » May 31st, 2008, 9:01 pm

pstoffers wrote:There is a $25 minimum

according to bob he been waving a magic wand and there no minimum for banned members

pstoffers · Post by **pstoffers** » June 1st, 2008, 10:44 am

I called friday for some things and John told me there was a $25 minimum

I guess I aint COOL like BOB

100hp honda · Post by **100hp honda** » June 1st, 2008, 11:52 am

if Pstofers cant get VIP treatment, theres no way in hell i can. bob you sure you and john are buddies?

Post by **AlisoBob** » June 1st, 2008, 12:28 pm

I'll call him one Monday to get the skinny....

..... perhaps the man has been coming down on him, for breaking Sudco policy?

100hp honda · Post by **100hp honda** » June 1st, 2008, 5:07 pm

AlisoBob wrote:I'll call him one Monday to get the skinny....

..... perhaps the man has been coming down on him, for breaking Sudco policy?

bob bob , he the man, if he cant do it no one can

. right on dude thnx for the help

pstoffers · Post by **pstoffers** » June 1st, 2008, 9:13 pm

100hp honda wrote:
AlisoBob wrote:I'll call him one Monday to get the skinny....

..... perhaps the man has been coming down on him, for breaking Sudco policy?

bob bob , he the man, if he cant do it no one can . right on dude thnx for the help

BannedCR500Riders.com

needle question

needle question