Use some common sense ....
britincali
Posts: 8207 Joined: May 31st, 2007, 7:10 pm Last active:
Location: Barstow, CA
Post
by britincali » May 19th, 2008, 8:11 pm
God damn that thing is LONNNNNNNNNNNG man
Coolness list by 90cr500guy
Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
100hp honda
Posts: 4394 Joined: July 4th, 2007, 6:57 pm Last active:
Post
by 100hp honda » May 19th, 2008, 8:22 pm
britincali wrote: God damn that thing is LONNNNNNNNNNNG man
you should see the hills up here, some are WAAAAAYYY fuggin steep. ill see if i can get pics next weekend. and i scratched my pipe in the sage brush already
...fukit, i aint using it for sand bike no more
Ported&Polished
Posts: 1898 Joined: June 23rd, 2007, 12:47 pm Last active:
Location: Prescott
Post
by Ported&Polished » May 19th, 2008, 8:30 pm
What happened to the stock silencer? Is it being used as a closet rod these days?
Don't Clyde it, ride it!
100hp honda
Posts: 4394 Joined: July 4th, 2007, 6:57 pm Last active:
Post
by 100hp honda » May 19th, 2008, 8:42 pm
Ported&Polished wrote: What happened to the stock silencer? Is it being used as a closet rod these days?
no, its on my car now
i took this a month ago. i didnt get a chance to run this hill because i tore my paddles up on a different hill, but when i get a dominator and 6.0 shock spring im going to give it a whirl
. theres more hills steeper than this one, but without NO2 im not sure its a smart idea for me to try them
iggys-amsoil
Posts: 3602 Joined: June 1st, 2007, 6:09 pm Last active:
Location: Just North of March Airfield CA
Post
by iggys-amsoil » May 19th, 2008, 10:34 pm
The gas can needs a good cleaning.
Ported&Polished
Posts: 1898 Joined: June 23rd, 2007, 12:47 pm Last active:
Location: Prescott
Post
by Ported&Polished » May 19th, 2008, 11:08 pm
Is that a divorced NP205 I see 3 inches of on the lower right corner of the first pic? Looks like a ford unit with a drivers side drop, them is gold!
Don't Clyde it, ride it!
dannygraves
Posts: 8020 Joined: June 1st, 2007, 2:03 pm Last active:
Location: Las Vegas, NV
Post
by dannygraves » May 20th, 2008, 7:15 am
you know... my master bath IS bigger than that garage!
nice hill how about some shots of that big freaken machine tryin' to kick you off at the top!
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
britincali
Posts: 8207 Joined: May 31st, 2007, 7:10 pm Last active:
Location: Barstow, CA
Post
by britincali » May 20th, 2008, 8:06 am
Coolness list by 90cr500guy
Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
lewisclan
PVT. 1st Class
Posts: 4804 Joined: June 1st, 2007, 3:34 pm Last active:
Location: Yucca Valley CA
Post
by lewisclan » May 20th, 2008, 8:17 am
what happend to your stock bike?
"the game of life of is not so much in holding a good hand as playing a poor hand well"
lewisclan
PVT. 1st Class
Posts: 4804 Joined: June 1st, 2007, 3:34 pm Last active:
Location: Yucca Valley CA
Post
by lewisclan » May 20th, 2008, 8:19 am
you mite want to get a domanator with kevlar and run bolts for a long lasting hillclimbing tire.
"the game of life of is not so much in holding a good hand as playing a poor hand well"
britincali
Posts: 8207 Joined: May 31st, 2007, 7:10 pm Last active:
Location: Barstow, CA
Post
by britincali » May 20th, 2008, 8:23 am
lewisclan wrote: domanator with kevlar .
CHA-CHING $$$$$$$$$
Ill bet that would cost more than his new garage.....
Coolness list by 90cr500guy
Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
lewisclan
PVT. 1st Class
Posts: 4804 Joined: June 1st, 2007, 3:34 pm Last active:
Location: Yucca Valley CA
Post
by lewisclan » May 20th, 2008, 9:07 am
I think its $6-7 per paddle extra for kevlar
and just about that for the hardend bolts, washers & nilock hardend nuts
But then you have a tire that seems to hang in there in hard dirt & rocks
so it would run you about $325 or so
"the game of life of is not so much in holding a good hand as playing a poor hand well"
britincali
Posts: 8207 Joined: May 31st, 2007, 7:10 pm Last active:
Location: Barstow, CA
Post
by britincali » May 20th, 2008, 9:22 am
lewisclan wrote:
so it would run you about $325 or so
Coolness list by 90cr500guy
Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
dannygraves
Posts: 8020 Joined: June 1st, 2007, 2:03 pm Last active:
Location: Las Vegas, NV
Post
by dannygraves » May 20th, 2008, 9:26 am
brit...its ok man...don't have a heart attack!
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
pstoffers
Posts: 1652 Joined: May 31st, 2007, 8:04 pm Last active:
Location: Oakdale, CA
Post
by pstoffers » May 20th, 2008, 12:48 pm
britincali wrote: lewisclan wrote:
so it would run you about $325 or so
" I have 3 or 4 of them "
100hp honda
Posts: 4394 Joined: July 4th, 2007, 6:57 pm Last active:
Post
by 100hp honda » May 20th, 2008, 4:04 pm
Ported&Polished wrote: Is that a divorced NP205 I see 3 inches of on the lower right corner of the first pic? Looks like a ford unit with a drivers side drop, them is gold!
no its a married 205 but i think they were the same thing if you take the adapter housing thing off. i payed $75 for it. it didnt cross my mind at the time to doube check the output shafts and make sure they were 32 spline though. i think its from a 1/2 ton so i dont know for sure until i take the yoke off
100hp honda
Posts: 4394 Joined: July 4th, 2007, 6:57 pm Last active:
Post
by 100hp honda » May 20th, 2008, 4:13 pm
lewisclan wrote: you mite want to get a domanator with kevlar and run bolts for a long lasting hillclimbing tire.
i think ill have enough money on my next paycheck for a regular dominator. it probly wont have kevlar or bolts though
lewisclan
PVT. 1st Class
Posts: 4804 Joined: June 1st, 2007, 3:34 pm Last active:
Location: Yucca Valley CA
Post
by lewisclan » May 20th, 2008, 5:10 pm
Ill still turn you on to the domanator
"the game of life of is not so much in holding a good hand as playing a poor hand well"
100hp honda
Posts: 4394 Joined: July 4th, 2007, 6:57 pm Last active:
Post
by 100hp honda » May 20th, 2008, 9:16 pm
thnx bro. now that i think of it, i might just spring for a new tire so i can get alot of life from it
Freemer
Posts: 166 Joined: September 25th, 2007, 11:29 pm Last active:
Post
by Freemer » May 21st, 2008, 12:53 am
Looks like a Home Depot tin shed to me - that's cool it's all ya need anyhow.
Nothing .....
Freemer
Posts: 166 Joined: September 25th, 2007, 11:29 pm Last active:
Post
by Freemer » May 21st, 2008, 12:58 am
Planning on Steel paddles are ya ?
Nothing .....