headstays, engine mounts, etc.

dannygraves · Post by **dannygraves** » March 5th, 2008, 6:31 am

I've got an ignition cover, I think, pm me and address an its headed your way!

Exnav · Post by **Exnav** » March 5th, 2008, 9:53 am

I thought I had both bought off Ebay and ended missing them when the auction ended early.

conrad5 · Post by **conrad5** » March 9th, 2008, 9:20 pm

Hello! I just picked up a running '88 for an AF conversion. I can have both covers on their way tomorrow. PM me with your address and I'll ship them out pronto. Thanks.

Mad Dog · Post by **Mad Dog** » March 11th, 2008, 8:27 am

I have both covers from an 01. Do you still need?

tweav · Post by **tweav** » March 11th, 2008, 11:57 pm

I don't know where to send the cover if they are still needed

VoR · Post by **VoR** » March 25th, 2008, 8:51 am

eyesky2002 wrote:How much for just a set of the engine mounts?

Did you ever get an answer to this?

dannygraves · Post by **dannygraves** » March 25th, 2008, 9:12 am

PM Shanman, I have some complete gen-1 kits, but I'm almost out... Shanman can sell you just the front mounts.

VoR · Post by **VoR** » March 25th, 2008, 9:25 am

Thanks...my BIL built this beast but its a little on the jerry rigged side and vibrates bad. I'd like to get at least the front mounts, they look real nice, and maybe the headstay though I'd probably prefer a double.

ugly1171 · Post by **ugly1171** » March 25th, 2008, 11:55 am

ShanMan wrote:still waiting for covers dudes...anyone still interested in this project?

I'm still interested, what options are you going to offer? ie colours & finish. I'd take a pair in black without any logo to suit a 99 motor.
Ugly

Exnav · Post by **Exnav** » March 25th, 2008, 12:04 pm

It's all in development. The ShanMan is working on it

nmdesertrider · Post by **nmdesertrider** » April 14th, 2008, 8:56 pm

Anyone have any front mounts? I could finish mine if I had some

ShanMan · Post by **ShanMan** » April 15th, 2008, 8:26 am

Sorry for the hold up boys, but my machinst lost a motherboard on his computer and was down a few days. We are doing a run of gen. one hardware now, and I am doing a beta set of engine covers and a beta version of the two piece steel head stay for both gen. one and gen. three. As soon as the standard hardware is complete, i will fire off a price list.

Thanks.

dannygraves · Post by **dannygraves** » April 15th, 2008, 8:41 am

hey shanman, have you thought about a... gen 4 kit???

I'm gonna be starting a gen-4 tonight. I was thinking about measuring everything I do and drawing it all up. even if the kit only included front and lower mounts and the headstay, that would help a lot of guys out!

ShanMan · Post by **ShanMan** » April 15th, 2008, 10:26 am

if I can help you to be the gen. 4 guru, you let me know.

dannygraves · Post by **dannygraves** » April 15th, 2008, 12:55 pm

thanks

Post by **AlisoBob** » April 15th, 2008, 1:40 pm

"Dan , the Gen 4 Man!"

I'll get those parts to UPS for you by Wed. night Danny...

dannygraves · Post by **dannygraves** » April 15th, 2008, 2:19 pm

coo, thank you sir!

tweav · Post by **tweav** » April 16th, 2008, 9:50 am

I'll take a set of 4th gen front mounts and a pair of head stay plates when you work out all the angles.

hoofarted · Post by **hoofarted** » April 16th, 2008, 12:10 pm

ShanMan wrote:if I can help you to be the gen. 4 guru, you let me know.

Hey Shanman - are the head stays for the Gen1 and 2 similar?

ShanMan · Post by **ShanMan** » April 16th, 2008, 3:13 pm

actually, I have no idea because I haven't been a part of a gen two conversion. I had a 2001, but I rode it as a 250. Hopefully somebody else can chime in, but I think the plates are flat and do not require the Z bend as the others do...kind of like a gen. four. Should be very simple to make!

Post by **AlisoBob** » April 16th, 2008, 3:53 pm

The Gen 4 are "Z" style.

ShanMan · Post by **ShanMan** » April 17th, 2008, 2:40 pm

shows you how litte I know about gen. fours.

Balaclava · Post by **Balaclava** » April 17th, 2008, 2:46 pm

dannygraves wrote:hey shanman, have you thought about a... gen 4 kit???
I'm gonna be starting a gen-4 tonight. I was thinking about measuring everything I do and drawing it all up. even if the kit only included front and lower mounts and the headstay, that would help a lot of guys out!

if 02 crf is gen 4 then i would be !!!!!

!!!!!

dannygraves · Post by **dannygraves** » April 17th, 2008, 3:11 pm

gen 4 is '04+crf250 and '05+crf450

ShanMan · Post by **ShanMan** » April 20th, 2008, 9:31 am

I have a quick request:

Can somebody please tell me the outlet nipple size for the cooling lugs coming out of the CR500 head? Also looking for the same info for the larger single gen. one radiator. I had this info in my billet splitter, but my computer crashed yesterday and I lost some of my files...that one being one of them.

Thanks in advance!

BannedCR500Riders.com

headstays, engine mounts, etc.

Can ship both covers tomorrow - need address.