I'm almost finished my 05 Gen 3 CR250 with the 91 CR500 engine build and I don't have any radiator hoses. (building from scratch) Does everyone just buy two sets of hoses (CR250 +CR500) and then take what they need? What's the consensus?
Cheers
What radiator hoses?
-
Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
The 500 upper hoses work, the lower cross over is its own depending on how you've done the outlets. and then obviously cr5 hoses at the waterpump. i usually get the black chinese rad hose set for the cr5 and then do my own lower cross over.
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
I did the same as Adam (per his recommendation actually). I got a silicone hose kit from eBay that I used for the upper hoses and the water pump to cylinder. I then used a straight piece of hose cut to length for the crossover and for the water pump to radiator I needed a hose with a 20* curve on one end. My local auto parts store had something that worked perfect.
2004 CRF450R | KTM 300 XC-W | XR100 minimoto | GSX-R 600 track | VFR800 street