CR500 ENGINE JIGS NOW AVAILABLE Part 2

kevin_s · Post by **kevin_s** » January 10th, 2012, 6:06 pm

This is the current jig I'm making as of 4/14,they are $155 shipped in the usa .

My email.. tanknicians@aol.com

kevin_s · Post by **kevin_s** » January 24th, 2012, 2:16 pm

tanknicians@aol.com

$150 + $5 if paying with Paypal

Post by **AlisoBob** » January 24th, 2012, 3:45 pm

Now THATS a proper jig!!!

$125 is a bargin...

asteroid500 · Post by **asteroid500** » January 24th, 2012, 3:51 pm

i know ... i bought one today ...

kevin_s · Post by **kevin_s** » January 24th, 2012, 5:39 pm

asteroid500 wrote:i know ... i bought one today ...

And I thank you for that mate.

other · Post by **other** » January 24th, 2012, 10:44 pm

I bought one last week, expecting it to arrive any minute . . . . but I intended to weld just that same headstay attachment on to it !

cryzsurfer · Post by **cryzsurfer** » January 25th, 2012, 4:31 am

It's become so politically correct where I work I have to call this a "fixture" no shit. I wish I'd had a jig when I did my conversion.
Craigus

kevin_s · Post by **kevin_s** » January 25th, 2012, 8:56 am

asteroid500 wrote:i know ... i bought one today ...

It's in the mail

asteroid500 · Post by **asteroid500** » January 25th, 2012, 12:40 pm

cryzsurfer wrote: I wish I'd had a jig when I did my conversion.
Craigus

X2

kevin_s · Post by **kevin_s** » February 9th, 2012, 4:34 pm

Has everybody recieved their jig?

asteroid500 · Post by **asteroid500** » February 9th, 2012, 10:37 pm

Yes mate,
nice workmanship my friend
A1 there.

kevin_s · Post by **kevin_s** » April 5th, 2012, 1:50 pm

asteroid500 wrote:Yes mate,
nice workmanship my friend
A1 there.

Thanks Dude.

kevin_s · Post by **kevin_s** » April 5th, 2012, 2:01 pm

This is the latest version off my jig,this one is on it's way to Canada.

emal me @ tanknicians@aol if you need one.. $155 + shipping

shipping to Canada is less than $20
shipping to Austraila is less than $20
usa shipping is free

Mik329 · Post by **Mik329** » April 12th, 2012, 1:36 pm

I think I like the triangle better. I had one of my jigs warp after about the third frame it was used on due to the 065 instead of 095 I went to. What are you using on this?

woodswhore · Post by **woodswhore** » April 12th, 2012, 3:01 pm

I just sent you an email, my computer wouldnt reply to your link. Dou still have jigs available?..Doug...313-268-6403

kevin_s · Post by **kevin_s** » April 12th, 2012, 6:54 pm

Mik329 wrote:I think I like the triangle better. I had one of my jigs warp after about the third frame it was used on due to the 065 instead of 095 I went to. What are you using on this?

It's all made from '095 wall ms,it isn't going to warp any time soon..

kevin_s · Post by **kevin_s** » April 12th, 2012, 6:56 pm

woodswhore wrote:I just sent you an email, my computer wouldnt reply to your link. Dou still have jigs available?..Doug...313-268-6403

I got it ,and sent you back a reply,I would have called you but it's almost 10 pm here now.

rancid1 · Post by **rancid1** » August 24th, 2012, 3:24 pm

will this fit a 2005 crf250 with a 87 cr500, thanks

kevin_s · Post by **kevin_s** » August 25th, 2012, 9:25 pm

rancid1 wrote:will this fit a 2005 crf250 with a 87 cr500, thanks

I can make any one you want.

http://www.youtube.com/user/500bigbore · Post by **Roostius_Maximus** » August 26th, 2012, 6:20 am

It'd be the same dimension 1987-01, only the 85-86 short deck cases would need a different head stay height

Bugsy · Post by **Bugsy** » February 11th, 2013, 9:17 am

Thank you Kevin! I just got it at my door here in Georgia.

Nick

kevin_s · Post by **kevin_s** » March 4th, 2013, 6:50 pm

Bugsy wrote:Thank you Kevin! I just got it at my door here in Georgia.

Nick

Right on Nick and thank you.
Kevin

kevin_s · Post by **kevin_s** » March 4th, 2013, 6:55 pm

I have more tubing on the way,I'm going to make a few jigs so if you need one now is the time to place an order.
Tanknicians@aol.com

$145 Shipped in the usa.
$155 Shipped to the hoons down under.AU

Bronson · Post by **Bronson** » December 4th, 2013, 8:00 am

Kevin, I just sent an email.
Thanks.

vito.a · Post by **vito.a** » April 14th, 2014, 4:20 pm

I purchased Kevin's jig for my conversion. It includes the cylinder head mount and is very accurate. It really helped keep all the motor mounts in place during welding.
When I was done welding, I removed the jig and all my motor mount bolts went in with little effort.

You will need a case to properly locate the right lower fame rail notch for the clutch cover bolt, but everything else can be done with the jig.

BannedCR500Riders.com

CR500 ENGINE JIGS NOW AVAILABLE Part 2

CR500 ENGINE JIGS NOW AVAILABLE Part 2

CR500 ENGINE JIGS NOW AVAILABLE

Re: CR500 ENGINE JIGS NOW AVAILABLE

jigs?

Re: jigs?