Done !! 06 crf450 conversion
Done !! 06 crf450 conversion
Uploaded with [URL=http://ima[/[URL=http://imageshack.us/photo/my-images/829/new5002.jpg/]
Uploaded with ImageShack.usURL]
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
2000 banshee, 2006 cr500AFC, 1987 LT500r
-
- Posts: 173
- Joined: September 3rd, 2007, 9:33 pm
- Contact:
- Gravel Scratcher
- Posts: 278
- Joined: September 20th, 2009, 8:45 pm
- Location: Australia, Central QLD
-
- Posts: 19
- Joined: April 30th, 2011, 11:41 pm
- Location: australia
-
- Posts: 19
- Joined: April 30th, 2011, 11:41 pm
- Location: australia
-
- Posts: 19
- Joined: April 30th, 2011, 11:41 pm
- Location: australia
Thanks guys. Took it out saturday for the first ride, short ride but worked awesome. The radiators i bought off ebay, I believe it was a company out of washington. Had to alter all the outlets as well as the bottom tank on the left rad for the pipe. Then with them being oversize they rubbed on the oversize gas tank, had to reform that a little as well.
2000 banshee, 2006 cr500AFC, 1987 LT500r
Nice build rjt. I am amazed at the differences in frame clearance between your 450 and my 250F. Specifically the cross member down in the footbox area. I literally had to lift engine out of mounts to get enough clearance to install bolt in shifter. And I used the newer CR 250 shifter to boot!!
I am guessing the 450 is a bit wider across at the footpeg.
I am guessing the 450 is a bit wider across at the footpeg.
--------------------------------------------------------------------------------
Nice build rjt. I am amazed at the differences in frame clearance between your 450 and my 250F. Specifically the cross member down in the footbox area. I literally had to lift engine out of mounts to get enough clearance to install bolt in shifter. And I used the newer CR 250 shifter to boot!!
I am guessing the 450 is a bit wider across at the footpeg.
Thanks There seems to be a bit more room with the 450 frame, even comparing it to my 03 cr250 conversion, it looks like it was shoehorned in compared to the 450.
Nice build rjt. I am amazed at the differences in frame clearance between your 450 and my 250F. Specifically the cross member down in the footbox area. I literally had to lift engine out of mounts to get enough clearance to install bolt in shifter. And I used the newer CR 250 shifter to boot!!
I am guessing the 450 is a bit wider across at the footpeg.
Thanks There seems to be a bit more room with the 450 frame, even comparing it to my 03 cr250 conversion, it looks like it was shoehorned in compared to the 450.
2000 banshee, 2006 cr500AFC, 1987 LT500r