My method is
1)put pwk 39 on ebay
2)use money to buy 41 from sudco
How to get the PWK 39 to a 41.5?
-
Bomberpilot
- Posts: 45
- Joined: October 29th, 2010, 6:04 am
- Last active:
I should have done that!
Now I guess I totally fucked it up. Put it together today and realized the gap between the housing and the slide. The slide is only little smaller than 41mm!
Do you also have the gap? I will still try to run it but I guess it won't run or just very crappy with this gap
Can't get rid of the impression that you guys and sudco is using a different carb somehow because mine would never go up to 42.29mm - even the 41.5mm were way too big. Should have stayed with 39mm!
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Now I guess I totally fucked it up. Put it together today and realized the gap between the housing and the slide. The slide is only little smaller than 41mm!
Do you also have the gap? I will still try to run it but I guess it won't run or just very crappy with this gap
Can't get rid of the impression that you guys and sudco is using a different carb somehow because mine would never go up to 42.29mm - even the 41.5mm were way too big. Should have stayed with 39mm!
Uploaded with ImageShack.us
Uploaded with ImageShack.us
-
blownbillybob
- Posts: 391
- Joined: March 13th, 2008, 9:50 pm
- Last active:
- Location: FRISCO
Holy shit! You fuked that carb!!!! That shit is a drag race only carb now there's know way it's going to idle, to much air??
Should have offset bored it!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Should have offset bored it!!!!!!!!!!!!!!!!!!!!!!!!!!!!
00'cr500 trailclimber
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)