Come on in, No registration needed.... Thinkin' about stepping up to the ultimate dirtbike? Ask any questions you need answered.
jeffatc250r
Posts: 49 Joined: September 29th, 2009, 2:02 pm
Post
by jeffatc250r August 23rd, 2010, 3:38 pm
WTB 85 crank
jeffatc250r
Posts: 49 Joined: September 29th, 2009, 2:02 pm
Post
by jeffatc250r August 23rd, 2010, 3:39 pm
Will also entertain a whole bottom end from 85-86
Roostius_Maximus
Site Admin
Posts: 4641 Joined: November 16th, 2007, 3:24 pmLocation: Mt Nebo, Manitoba, Canada
Contact:
Post
by Roostius_Maximus August 23rd, 2010, 3:49 pm
kball1313 has one, pm him
dannygraves
Posts: 8020 Joined: June 1st, 2007, 2:03 pmLocation: Las Vegas, NV
Post
by dannygraves August 23rd, 2010, 6:37 pm
so you know, you can use an '87+ crank with the cometic spacer.
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
south central hoon
Post
by south central hoon August 23rd, 2010, 7:04 pm
dannygraves wrote: so you know, you can use an '87+ crank with the cometic spacer.
that must lower the compression quite a bit, no?
dannygraves
Posts: 8020 Joined: June 1st, 2007, 2:03 pmLocation: Las Vegas, NV
Post
by dannygraves August 23rd, 2010, 7:42 pm
na, TDC is the same and the port locations are the same as '87+ on '85-'86 jugs.
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
jeffatc250r
Posts: 49 Joined: September 29th, 2009, 2:02 pm
Post
by jeffatc250r August 24th, 2010, 10:01 am
^^Thanks for that lil tidbit of info, that does indeed open up a few more doors.
south central hoon
Post
by south central hoon August 24th, 2010, 3:38 pm
dannygraves wrote: na, TDC is the same and the port locations are the same as '87+ on '85-'86 jugs.
