1991 CR500R Stock Gearing?
-
- Posts: 19
- Joined: October 12th, 2009, 2:30 pm
- Last active:
1991 CR500R Stock Gearing?
Hey guys I am wondering what the stock gearing is on a 1991 CR500R.... I just got my bike and it has 14T and 48T. It seems like it is topping out at around 60 or 70? I am thinking this is geared really low because I just got rapped by my buddies 03 yz450F... Whats the deal here? I weigh almost 200lbs and he only weighs around 130. But even with that shouldn't I get more top end out of my 500? I thought it was sad that he could beat me, and he's also got a 4 speed trans. What do you guys think?
- britincali
- Posts: 8207
- Joined: May 31st, 2007, 7:10 pm
- Last active:
- Location: Barstow, CA
-
- Posts: 19
- Joined: October 12th, 2009, 2:30 pm
- Last active:
- britincali
- Posts: 8207
- Joined: May 31st, 2007, 7:10 pm
- Last active:
- Location: Barstow, CA
You sound about rite with the sprockets on your bike, its the gears inside the tranny that are fukin useless.
I have the same bottom end on my dune bike and run 15/44 gearing just to make up for honda's stupidity.
I have the same bottom end on my dune bike and run 15/44 gearing just to make up for honda's stupidity.
Coolness list by 90cr500guy
Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
-
- Posts: 19
- Joined: October 12th, 2009, 2:30 pm
- Last active:
- britincali
- Posts: 8207
- Joined: May 31st, 2007, 7:10 pm
- Last active:
- Location: Barstow, CA
Its fast top end, Ive never clocked it wide open but its quick
15/44 does make it not fun in the tight stuff, one of these days im gonna slap a wide ratio tranny in it.

15/44 does make it not fun in the tight stuff, one of these days im gonna slap a wide ratio tranny in it.
Coolness list by 90cr500guy
Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
- Last active:
Re: 1991 CR500R Stock Gearing?
you asked this question on 3 different sitesRedtillIdie wrote:Hey guys I am wondering what the stock gearing is on a 1991 CR500R




change the sprockets if it aint going fast enough. the other site has free manuals if you need that also.