Silverwood , Tomorrow 5-20

Post by **AlisoBob** » May 19th, 2010, 10:08 am

Me

Mad Dog

?????

bgraley · Post by **bgraley** » May 19th, 2010, 10:13 am

Ahh i wish i could go. i have work till next wed and then i am off for the summer. do you want to ride next week too?

Hellbear · Post by **Hellbear** » May 19th, 2010, 1:08 pm

Damn! If I didn't have a Dr. Appointment tomorrow I would be there.

redridermv · Post by **redridermv** » May 19th, 2010, 6:17 pm

Maybe next time, I played hooky on Monday for a charity golf tournament put on by San Manuel casino, they sure had the money to put on quite a spread!!!

"SOLID Bro!!" · Post by **"SOLID Bro!!"** » May 19th, 2010, 10:38 pm

Love to but Cepek and I are headed up to the SAC to the Outdoors at Hangtown.

Post by **AlisoBob** » May 20th, 2010, 8:33 am

Mad Dog was having Magura trouble...

Mike, follow these bleed instructions....

http://bannedcr500riders.com/board/viewtopic.php?t=249

Mad Dog · Post by **Mad Dog** » May 20th, 2010, 2:26 pm

It's working now. MSM fixed it up and walked me through it.
Still doesn't feel like it's disengaging completely.
Not sure about these Magura's, cost me a day of riding.

Never had problem with a cable.

britincali · Post by **britincali** » May 20th, 2010, 2:30 pm

I need to run an extra spacer under my slave cylinder for it to disengage properly, I drilled out a 1/4" 6mm socket and used that under the magura spacer to move the slave up and give it some more pull.

Post by **AlisoBob** » May 20th, 2010, 3:43 pm

britincali wrote:I need to run an extra spacer under my slave cylinder for it to disengage properly, I drilled out a 1/4" 6mm socket and used that under the magura spacer to move the slave up and give it some more pull.

Get the air out, pikey....

britincali · Post by **britincali** » May 20th, 2010, 3:50 pm

No air.

It bottoms out on the stroke and wont pull the lever high enough.

Algava · Post by **Algava** » May 27th, 2010, 9:35 am

My new Magura worked just fine out of the box.
The only adjustment is the clutch lever thumb screw.
I only had mine on for a few rides now, and works great. I did have to adjust mine a few times while riding but that was probably due to the engine warming up.
I figure when the clutch is worn it would act that way.
Al

Post by **MojoScojo** » May 27th, 2010, 9:44 am

You're coming to my place?!?!

http://www.silverwoodthemepark.com/

south central hoon · Post by **south central hoon** » May 27th, 2010, 4:57 pm

MojoScojo wrote:You're coming to my place?!?!

http://www.silverwoodthemepark.com/

I laughed about this place too after moving to LA from Spokane.

as a kid, we hangared our Cessna 182 at silverwood when it was called Henley Airdrome.

BannedCR500Riders.com

Silverwood , Tomorrow 5-20

Silverwood , Tomorrow 5-20