Page 1 of 1
how to remove needle jet.......
Posted: September 30th, 2010, 11:13 am
by qkenuf4u
ok mines worn oblong so thats gonna reak havoc on tuning... how do the CR5's needle jets come out ? most you can knock out from the top/bottom but this one doesnt move as far as i can tell...
HELP PLEASE...
Posted: September 30th, 2010, 11:14 am
by AlisoBob
They dont on a Keihin...
Posted: September 30th, 2010, 11:22 am
by qkenuf4u
AlisoBob wrote:They dont on a Keihin...
so in other words im S.O.L with this carb ?
oh yaaaaa one more thing i dont have money for...
Posted: September 30th, 2010, 11:35 am
by lewisclan
Posted: September 30th, 2010, 11:53 am
by qkenuf4u
yep im screwed....
non-removable
awesome
Posted: September 30th, 2010, 12:43 pm
by fastkart
Take off the slide.
Look at the top of the slide, you'll see a hex head.
Grab a 6mm socket and unscrew/remove it.
Push the needle out the top.
Posted: September 30th, 2010, 12:47 pm
by britincali
I think hes takling about the orifice the needle slides in.....
Posted: September 30th, 2010, 12:47 pm
by AlisoBob
No Karty .... the needle JET. ( The hole the needle rides in)
On a Mukuni, its changable.
Posted: September 30th, 2010, 12:47 pm
by britincali
Beat ya bobber
Posted: September 30th, 2010, 12:49 pm
by qkenuf4u
yep bobs got it...
Posted: September 30th, 2010, 1:15 pm
by qkenuf4u
THANKS TO ALL !!!! found a carb on here for 25$.... i can live with that..
Posted: September 30th, 2010, 1:24 pm
by ISBB
yer welcome
Posted: September 30th, 2010, 2:02 pm
by fastkart
My bad... I figured there was some sarcasm going on
Posted: October 11th, 2010, 9:30 pm
by iggys-amsoil
britincali wrote:Beat ya bobber
x2
Same as Mukuni.
I took one out just to see what #'s are stamped on it.