BannedCR500Riders.com

Posted: **September 2nd, 2010, 9:36 pm**

Taking the GSS motor for a rip...It's really a great motor. See for yourself.

Posted: **September 2nd, 2010, 10:08 pm**

Sounds good!

You use the clutch WAYYYYY more than I do, I just use it to start and stop

Is that by Ft irwin rd?

Posted: **September 2nd, 2010, 10:10 pm**

I like how he grabs it a few times, looking for 6th.....

I'm with Brit, I only use the clutch about 5 times a day.

Posted: **September 2nd, 2010, 10:13 pm**

your supposed to use the clutch

but 2 fingers only you lose control over the bars using 4

Posted: **September 2nd, 2010, 10:47 pm**

I like how he grabs it a few times, looking for 6th.....

at least im not the only one

your supposed to use the clutch but 2 fingers only you lose control over the bars using 4

i have better luck using one finger, because i need to hang on tight,
the one downside i found is if i always have a finger on the clutch when i bail my clutch fingers get mangled

Posted: **September 3rd, 2010, 6:51 am**

Sounds good. Where were you riding at? Looks familiar.

Were you yelling towards the end?

Posted: **September 3rd, 2010, 3:12 pm**

britincali wrote:

Sounds good!

You use the clutch WAYYYYY more than I do, I just use it to start and stop

Is that by Ft irwin rd?

Sometimes I downshift without a clutch, but isn't it hard on gears to upshift while pinned without a clutch? The springs are heavy in the CF clutch Glenn put in, and the cable is worn, so no way I could use one or two fingers on the clutch. It's running a little fat on the top end (100+F), but it's perfect when it's cool out. It was shot along Irwin road outside of Barstow with a GoPro HD cam. Sometimes I talk to my bike when I ride, don't You? lol.

Posted: **September 3rd, 2010, 3:23 pm**

Sometimes I talk to my bike when I ride, don't You?

true 500 rider

Posted: **September 3rd, 2010, 3:23 pm**

tacogrande wrote:
Sometimes I downshift without a clutch, but isn't it hard on gears to upshift while pinned without a clutch? .

Just drop the throttle for a split second

A fresh well routed clutch cable is a must with the barnett other wise your arm ends up looking like popeye

Posted: **September 3rd, 2010, 3:23 pm**

2strokeforever wrote:
Sometimes I talk to my bike when I ride, don't You?
true 500 rider

I talk all the time but normally its "fuk fuk fuk fuk fuk fuk fuk fuuuuuuuk...."

Posted: **September 3rd, 2010, 3:24 pm**

the way to go would be get a magura with ee lever or 8.5 master cyl, or both

Posted: **September 3rd, 2010, 3:25 pm**

I hated the magura with the barnett, for some weird reason it just dint work well

I ended up putting it back on my AF.

Posted: **September 3rd, 2010, 3:26 pm**

?????????????????????

Posted: **September 3rd, 2010, 3:52 pm**

britincali wrote:
2strokeforever wrote:
Sometimes I talk to my bike when I ride, don't You?
true 500 rider

I talk all the time but normally its "fuk fuk fuk fuk fuk fuk fuk fuuuuuuuk...."

I think I said "GO MOTHER FUCKERRRR!!!! NEED MORE POOOWWWWEERRRRR!!!!" Or something to that effect. Hmm. I'll have to try your shifting method out and see if it's faster, I do need a new cable for sure though. And brake pads, I don't have any back brakes at all, but who needs those.

Posted: **September 3rd, 2010, 4:49 pm**

britincali wrote:I talk all the time but normally its "fuk fuk fuk fuk fuk fuk fuk fuuuuuuuk.... WTF just fell off???"

Posted: **September 3rd, 2010, 5:39 pm**

britincali wrote:
tacogrande wrote:
Sometimes I downshift without a clutch, but isn't it hard on gears to upshift while pinned without a clutch? .

Just drop the throttle for a split second

Thats ok for what he's doing but not for the start of a race. You will find yourself in last place.

Besides,.......... It sounds good for the video.

Posted: **September 3rd, 2010, 5:55 pm**

Thats ok for what he's doing but not for the start of a race. You will find yourself in last place, because you probably cant jet it either

BannedCR500Riders.com

GSS full race porting vid

GSS full race porting vid