BannedCR500Riders.com

after reading bobs sticky, this poor chap now has rope stuck in his engine

http://www.thumpertalk.com/forum/showth ... p?t=917933

hahaha dumbass! the rope is a good idea, but i always use an impact to remove nuts and bolts that would otherwise need something "locked up"

if he prefered to use a torque wrench on the nut, metal bar through the rear sprocket would be the way to go, or have someone hold the brake, or remove chain and use the tabs on the clutch holder tool. or impact if your not concearend with torque. hes in a real pickle now . fuggin rope stuck in there . damnit thats funny. hate to laugh at him but its funnier the longer i think about it. probly scrathin his head wonderin how the fuk to get a rope out now

100hp honda wrote:after reading bobs sticky....

After taking career advice from Clyde, this guy now gives blowjobs for $12 each.

for hell sakes atleast go offer the dude some help getting the rope out

dumb fucks like that are the reason I don't trust used bikes

Guy must have fed 2' not 2" into the hole.

I bet he snagged a port, then forced the piston all the way up with the rope wedged between the piston and cylinder wall.

i think hes got a powervalve on there. that rope aint never coming out

UPDATE: still aint got the rope out

Should have used a penny <-- sarcasm

AlisoBob wrote:Guy must have fed 2' not 2" into the hole.

+1 Rope works great if you bring the piston up top first and just use a little in the squish

Eyesky for Avatar of the year