Page 1 of 1
Carb boot help
Posted: August 27th, 2010, 3:43 pm
by asteroid500
OK, helping a mate today, he's having trouble with his carby boot.
we have an 2001/CR250 with a 91/500 motor, what boot and why.
I need this info ASAP
DONT YOU DARE.....
ive try'd the search function i've even been over to camp christianly saints but no luck...lots of big red X's were images used to be.
Posted: August 27th, 2010, 4:00 pm
by jarnott71
i used 98 cr250 boot worked good on gen4 just had to make a peice for th front of the box. got all the info from this site
Posted: August 28th, 2010, 3:57 am
by Roostmaster
Asteroid, are you talking about Deni's bike?
Its the same as mine, I used the CR500 rubber snorkel boot thingy with little bit of heat gun help to make it soft, find its home on the carby intake and let it set in place. Should work ok.
Hows his bike looking? Hows your bike going? Will ya be ready in 5 weeks when Im back?
Posted: August 28th, 2010, 5:22 am
by gregrobo
we used the 500 boot on the old mans 01 cr 250 af 500 wiith no modification at all fits straight into the cr 250 airbox
Posted: August 28th, 2010, 12:01 pm
by Tharrell
Don't mean to hijack your thread but, there are a lot of missing images.
I've been researching a build and it's difficult with missing images or bad links. Even some of the stickys are missing stuff.
Gen 2 is what I'm after myself.
Posted: August 28th, 2010, 3:20 pm
by asteroid500
Tyrell,
Your going to have to build a thread yourself, so do it right good quality pics informitive info & use a quality pic server.
Posted: August 28th, 2010, 7:43 pm
by Tharrell
Say what?
Posted: August 28th, 2010, 11:06 pm
by asteroid500
Yeh sorry Roosty,
Deni couldnt get his boot to line up.
Still waiting for my 1st's...they're on the water as we speak
Posted: September 2nd, 2010, 8:41 pm
by dubious01
I can't remember, but doesn't the 91 have the shorter reed cage?
That may be your issue.
In addition, on my 99, I had to use a 10mm "moose" reed cage spacer to get the 99 250 airbox and boot to line up to my 98 motor perfect.
not sure if any of this helps...
Posted: September 2nd, 2010, 9:40 pm
by hoofarted
My 01 250 boot lined up fine with my 92 500 motor. It needed some persuasion at first - then some heat; let it set and its good as factory now.
Posted: September 3rd, 2010, 5:36 am
by Roostius_Maximus
asteroid500 wrote:Yeh sorry Roosty,
Deni couldnt get his boot to line up.
Still waiting for my 1st's...they're on the water as we speak
are you serious that neither the trans or the scotts are there yet?
