Page 1 of 1
WTB 85 crank
Posted: August 23rd, 2010, 3:38 pm
by jeffatc250r
WTB 85 crank
I *think* they are the same from 84-86.......Looking for something that is useable and not in need of a rebuild. been long enough and need to get my 500 powered trike back up to par. Shoot me a shipped price to mass zip 01005 Thanks Jeff
Posted: August 23rd, 2010, 3:39 pm
by jeffatc250r
Will also entertain a whole bottom end from 85-86
Posted: August 23rd, 2010, 3:49 pm
by Roostius_Maximus
kball1313 has one, pm him
Posted: August 23rd, 2010, 6:37 pm
by dannygraves
so you know, you can use an '87+ crank with the cometic spacer.
Posted: August 23rd, 2010, 7:04 pm
by south central hoon
dannygraves wrote:so you know, you can use an '87+ crank with the cometic spacer.
that must lower the compression quite a bit, no?
Posted: August 23rd, 2010, 7:42 pm
by dannygraves
na, TDC is the same and the port locations are the same as '87+ on '85-'86 jugs.
Posted: August 24th, 2010, 10:01 am
by jeffatc250r
^^Thanks for that lil tidbit of info, that does indeed open up a few more doors.
Posted: August 24th, 2010, 3:38 pm
by south central hoon
dannygraves wrote:na, TDC is the same and the port locations are the same as '87+ on '85-'86 jugs.
