Page 1 of 1
Airbox boot suggestions for 2007 CRF450
Posted: July 13th, 2010, 1:47 pm
by Boise Synthetics 95
What is the best boot to fit to the stock 450 air box ? I am using the stock PJ carb for a 93 motor.
Posted: August 13th, 2010, 6:38 am
by dubious01
98-01 CR250
98-01 CR125
These boots are the longest and will work best, although you might still require a reed spacer or rad valve to get the distances and alignment correct.
You will need to fab an adapter plate for the air box
Posted: August 13th, 2010, 9:37 am
by blackz34
I uses a 98 CR250 on my 2008 450. Lenght is good with my 1/8 airbox adaptor. I have Boyesen rad valve too.
Posted: August 13th, 2010, 7:27 pm
by Lonewolf039
dubious01 wrote:97-01 CR250
98-01 CR125
These boots are the longest and will work best, although you might still require a reed spacer or rad valve to get the distances and alignment correct.
You will need to fab an adapter plate for the air box
I used a 99 cr250 airboot as well with my 05 450 conversion as well.
Posted: September 19th, 2010, 7:26 pm
by Boise Synthetics 95
Thanks, I got the boot. I think I will fabricate the adaptor out of plastic first.
Posted: September 20th, 2010, 11:56 pm
by Jeff4510
I'm using a stock modified reed cage per Glen from GSS porting and it's going on a crf250x, any idea which boot? thanks!
dubious01 wrote:97-01 CR250
98-01 CR125
These boots are the longest and will work best, although you might still require a reed spacer or rad valve to get the distances and alignment correct.
You will need to fab an adapter plate for the air box
Posted: September 22nd, 2010, 11:22 am
by dubious01
from what I have read here, the same boot is needed
check alisobob's build,
In fact i would read all of these associated for the CRF250 chasis:
http://www.bannedcr500riders.com/board/ ... php?t=1840
Posted: October 1st, 2010, 8:39 am
by dubious01
Guys, the 98-99 250, and 98-99 125 Boot is the longest
read here:
--------------------------------------------------------------------------------
Balaclava wrote:
but i've read that the 99 boot is quite a bit longer, which is what i need
That is what I used 7 1/4" total length vs the 6 3/4" length of the 01.
_________________
"When your riding your living... Everything else is just waiting!"
MXMotoworx.com
2003 Honda CR500AF
Posted: October 1st, 2010, 10:14 am
by Jeff4510
which 99, the 250 or 125?
dubious01 wrote:Guys, the 97-99 250, and 98-99 125 Boot is the longest
read here:
--------------------------------------------------------------------------------
Balaclava wrote:
but i've read that the 99 boot is quite a bit longer, which is what i need
That is what I used 7 1/4" total length vs the 6 3/4" length of the 01.
_________________
"When your riding your living... Everything else is just waiting!"
MXMotoworx.com
2003 Honda CR500AF
Posted: October 1st, 2010, 4:01 pm
by dubious01
I think they are the same from what I read.
125 or 250 for that year.
Posted: October 1st, 2010, 7:09 pm
by 2strokeforever
dont know if it helps but my SH came with a KZ3R boot
Posted: October 2nd, 2010, 7:51 am
by eyesky2002
98-99 CR250 is the right one, 97 did not fit and neither did the 00.
Posted: November 17th, 2010, 8:15 pm
by Jeff4510
eyesky2002 wrote:98-99 CR250 is the right one, 97 did not fit and neither did the 00.
the 97 I just got is only 6.125 inches long, definitely not going to work!
edit, it's 7 inches
Posted: November 23rd, 2010, 10:05 am
by dubious01
I tried to edit the post, but whenever I was quoted I can not.
98-99 are the longest. Some have used reed spacers, and other boots.
Posted: November 23rd, 2010, 11:59 am
by dubious01
Posted: November 23rd, 2010, 12:56 pm
by britincali
Sold
Posted: November 23rd, 2010, 1:58 pm
by Jeff4510
britincali wrote:Sold
good for you! Will you kindly post the measurement of it when you receive it for all of us? thanks
Posted: November 23rd, 2010, 2:08 pm
by eyesky2002
98-99
[/img]
Posted: November 23rd, 2010, 10:06 pm
by dubious01