FS: 1989 CR250
Posted: May 27th, 2010, 8:25 am
Looking to get $400 for it.
The good:
Renforced lower frame - cromoly plate on bottom frame rails where these normally fail.
92 forks with 92 upper clamp.
Super clean
The bad:
Bottom end has a slight vibration when freewheeling in the air - not when moving on the ground or free revving. Stopped riding it and haven't started it since the first time I heard it.
I don't have the time or tools to get into the bottom end, but for those of you that are mechanically inclined, here you go.
Or strip it for parts
The good:
Renforced lower frame - cromoly plate on bottom frame rails where these normally fail.
92 forks with 92 upper clamp.
Super clean
The bad:
Bottom end has a slight vibration when freewheeling in the air - not when moving on the ground or free revving. Stopped riding it and haven't started it since the first time I heard it.
I don't have the time or tools to get into the bottom end, but for those of you that are mechanically inclined, here you go.
Or strip it for parts
