1985 rebuild/mod

Recount your rebuilds here!
1ugly85cr500
Posts: 37
Joined: February 4th, 2010, 4:19 pm

1985 rebuild/mod

Post by 1ugly85cr500 »

IHi iv been on another site similar to this but annyway here's waht I'm doin I have a 1985 that I got for $700 and rode it down from crownking when a head gasket blew or was blown and caused the rads to clog and the bike overheated it made the head and studs to be come one piece so I have to remove the motor to knock the head off some of the mods I'm doin is updating the front forks to the 89 style swaintec coating on the piston and clean up and match the ports and relive the bridge the whole frame will be painted flash red the rims well be cleand up and the jug sand blasted and then coated with a clear enamal to keep the shine and the head well be annodized red with polished stud nuts some currently the frame does not want to let the engine go the swingarm piviot bolt well not budge so
I'm soakin it in wd 40 and removing the shock and rear tire to help get any pressure off the bolt well see how that works I'm open to suggestions so tell memwhat you think
User avatar
AlisoBob
"Hoon-father"
Posts: 15404
Joined: May 31st, 2007, 6:39 pm
Location: Aliso Viejo Ca

Re: 1985 rebuild/mod

Post by AlisoBob »

1ugly85cr500 wrote:the jug sand blasted and then coated with a clear enamal to keep the shine and the head well be annodized red with polished stud nuts
I can smell a web-rider from a mile away...
1ugly85cr500
Posts: 37
Joined: February 4th, 2010, 4:19 pm

Post by 1ugly85cr500 »

Web rider? :? The enamal is high temp it says 600*f on the can iv used simlar paint on exhaust pips and had no burning of the paint and I will ride the bike it won't be a garage queen that's what my next bike well be
Last edited by 1ugly85cr500 on May 4th, 2010, 11:57 am, edited 2 times in total.
User avatar
AlisoBob
"Hoon-father"
Posts: 15404
Joined: May 31st, 2007, 6:39 pm
Location: Aliso Viejo Ca

Post by AlisoBob »

Dude, you got about 15 seconds to learn how to use a spell checker.

R U Reeetharded?
User avatar
caseyracing222
Posts: 569
Joined: January 28th, 2009, 4:20 pm

Post by caseyracing222 »

AlisoBob wrote:Dude, you got about 15 seconds to learn how to use a spell checker.

R U Reeetharded?
for real this guy reminds me of honda02 everything they type is hard to read and understand :lol:
-Jake

Image
100hp honda
Posts: 4394
Joined: July 4th, 2007, 6:57 pm

Post by 100hp honda »

that honda02 guy was a real pain in the azz. read on TT he retired to the old folks home :D. slow old fart was another pain in the azz
Scotty2fast
Posts: 9
Joined: June 28th, 2008, 12:09 pm

Post by Scotty2fast »

C'mon Clyde you know who he is and how he was lambasted for his spelling and punctuation over on Traces site , You even asked everyone to leave him alone , Chumly you better step it up or they will eat you alive over here. No Dis to this site but peeps speak there mind here and that generally dont fly over there. Damn I love Beams recipe , AHHHH .
1ugly85cr500
Posts: 37
Joined: February 4th, 2010, 4:19 pm

Post by 1ugly85cr500 »

Ya I see they pulled Brit apart all well I can handle it But what sucks is when I hit the post button on my phone and the dam key board pops up and add stupid random letters in my post
100hp honda
Posts: 4394
Joined: July 4th, 2007, 6:57 pm

Post by 100hp honda »

i know who chumly is. dont seem like a bad guy to me but i get annoyed at the improper sentences just like everyone else.
1ugly85cr500
Posts: 37
Joined: February 4th, 2010, 4:19 pm

Post by 1ugly85cr500 »

I need new wheel barings do they still make them for my bike?
User avatar
Roostius_Maximus
Site Admin
Posts: 4641
Joined: November 16th, 2007, 3:24 pm
Location: Mt Nebo, Manitoba, Canada
Contact:

Post by Roostius_Maximus »

no
100hp honda
Posts: 4394
Joined: July 4th, 2007, 6:57 pm

Post by 100hp honda »

chumly you know how to use ebay ? wheel bearing kits are plentiful there

rear
http://cgi.ebay.com/ebaymotors/REAR-WHE ... ccessories

front
http://cgi.ebay.com/ebaymotors/Front-Wh ... ccessories
User avatar
AlisoBob
"Hoon-father"
Posts: 15404
Joined: May 31st, 2007, 6:39 pm
Location: Aliso Viejo Ca

Post by AlisoBob »

100hp honda wrote:chumly you know how to use ebay ?
Chumley couldnt find his asshole with a funnel
1ugly85cr500
Posts: 37
Joined: February 4th, 2010, 4:19 pm

Post by 1ugly85cr500 »

Where can I find a swing arm piviot bolt myns a little messed up
User avatar
AlisoBob
"Hoon-father"
Posts: 15404
Joined: May 31st, 2007, 6:39 pm
Location: Aliso Viejo Ca

Post by AlisoBob »

1ugly85cr500 wrote:Where can I find a swing arm piviot bolt myns a little messed up
STRIKE TWO!!!

Image


You only got 1 to go Chums....
1ugly85cr500
Posts: 37
Joined: February 4th, 2010, 4:19 pm

Post by 1ugly85cr500 »

Strike 2 for what?? I have already tried service Honda and bike bandit no luck I also called the dealer and a local parts store I guess I could try craigslist
User avatar
AlisoBob
"Hoon-father"
Posts: 15404
Joined: May 31st, 2007, 6:39 pm
Location: Aliso Viejo Ca

Post by AlisoBob »

1. Your asking in the wrong forum....

2. I found this is 4 seconds...

http://cgi.ebay.com/ebaymotors/1985-198 ... ccessories


Were not here to wipe your ass......

Your spelling and grammar are all fucked up because your parents havent made you do shit, or made you attempt to accomplish a thing since you fell out of your momma's snatch....

Now your trying the same thing here because your a lazy pile of shit.

Sorry if I burst your bubble on life.

If YOU posted the ebay link, and ASKED if this was a good deal, or if anyone had the same thing gathering dust out in the garage and wanted to get rid of it we wouldnt be all over your ass....


But down the bong, stop beating off, go wipe your nose, and just once.... TRY to do something productive today.... and stop just taking up space on our website.
Last edited by AlisoBob on May 10th, 2010, 6:08 pm, edited 2 times in total.
User avatar
sabreguy
Posts: 2915
Joined: June 1st, 2007, 5:07 pm
Location: Middle of the Freakin Mojave Desert!

Post by sabreguy »

EBAY BOY EBAY

http://cgi.ebay.com/ebaymotors/86-honda ... ccessories

http://cgi.ebay.com/ebaymotors/1985-198 ... ccessories

http://cgi.ebay.com/ebaymotors/1985-Hon ... ccessories

90117-KA3-831 is the part number you need

Go here and put that number in the box on the right hand side (quick parts look up) and it will tell you all the other bikes that part fits!
http://www.hondapartspitstop.com/pages/ ... Honda.aspx
88CR500
ROOST ON PEOPLE!!!
User avatar
AlisoBob
"Hoon-father"
Posts: 15404
Joined: May 31st, 2007, 6:39 pm
Location: Aliso Viejo Ca

Post by AlisoBob »

Look, you made Saber do you work for you.....

You owe Saber $20
User avatar
sabreguy
Posts: 2915
Joined: June 1st, 2007, 5:07 pm
Location: Middle of the Freakin Mojave Desert!

Post by sabreguy »

Bob it's sabRE :lol: :lol: :lol:
88CR500
ROOST ON PEOPLE!!!
1ugly85cr500
Posts: 37
Joined: February 4th, 2010, 4:19 pm

Post by 1ugly85cr500 »

I'm sorry I don't like eBay I lost $350 on there but if that's what it comes too I did do some searchin for the part and for your info I have two jobs and keep our house hold runnin my dad works 50+hrs my brother smokes dope I did do it once and it almost killed me it but me in the hospital so quit with the pot jokes I have horrible spelling and grammer my fault so let's get over that I am working on it. Cant wait my freinds factory team is coming over and there going to remove the god forsaken bolt and then this project well get movin fast so I'll just postin pics of progress.
User avatar
britincali
Posts: 8207
Joined: May 31st, 2007, 7:10 pm
Location: Barstow, CA

Post by britincali »

You have a whole factory team coming over to remove a swingarm bolt????
Coolness list by 90cr500guy

Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
User avatar
AlisoBob
"Hoon-father"
Posts: 15404
Joined: May 31st, 2007, 6:39 pm
Location: Aliso Viejo Ca

Post by AlisoBob »

1ugly85cr500 wrote:...I did do it once and it almost killed me it put me in the hospital
Sounds like you bought your weed from Stoffers, and not that seed and stem crap Brit sells.....

Oh, and that was the most coherent post you ever made..... shows you CAN do it, if you WANT to do it.
1ugly85cr500
Posts: 37
Joined: February 4th, 2010, 4:19 pm

Post by 1ugly85cr500 »

I'm not sure how much longer I'll be around I have this funny feeling ya know so I don't want to have too many enemies any way ya Brit there going to do some other stuff too were going to hang out also
User avatar
asteroid500
Posts: 1047
Joined: January 5th, 2009, 1:29 am
Location: Australia Melbourne

Post by asteroid500 »

I use to hang out in some unusual places...i've had my jeans fixed since then....

Bob go easy on the lad.....he could be a Latvian born American living in Harlem....whos to know his background...
OH ugly were can i get some of that hospitalization weed from...i realy need to get ALL FUCKED UP :twisted:
"not speeding officer".....qualifying

CR250 97
CR500 AF 99 (in progress)
CR500 AF CR G-4
CR500 1985 true legend
RGV250 96 X2
GSXR600 07 TRACK BIKE
VH Commadore cup car (race)
Post Reply