BannedCR500Riders.com

Posted: **April 3rd, 2010, 9:01 am**

This is a 1990 motor I put in a gen3 for a friend the other day. first ride out an BAMMMMMMM

Posted: **April 3rd, 2010, 9:27 am**

damn stoffers that would nearly make me cry

Posted: **April 3rd, 2010, 9:45 am**

That sux........ I'd be all.....

Posted: **April 3rd, 2010, 1:53 pm**

BUMMER Dude.

Posted: **April 3rd, 2010, 4:39 pm**

One crier isn't enough for a busted case....

Posted: **April 3rd, 2010, 5:35 pm**

pstoffers wrote:This is a 1990 motor I put in a gen3 for a friend the other day. first ride out an BAMMMMMMM

Remind me to not have you work on any of my stuff!!

Posted: **April 4th, 2010, 11:40 am**

Did the kickstarter spindle break? Usually if they're bent and you go to start it that happens. Even more so if it has lots of compression.

Posted: **April 4th, 2010, 3:16 pm**

ive heard of people welding them. they are alloy, not magnesium like in the old ones.

ive heard this problem occurs if you havent installed your kickstarter correctly.

Posted: **April 4th, 2010, 6:53 pm**

A new one is around $120 so don't bother with epay- I have seen them go for more than that

Posted: **April 4th, 2010, 7:51 pm**

lucky the center case looks alright

Posted: **April 4th, 2010, 8:20 pm**

gregrobo wrote:lucky the center case looks alright

Nope it broke too...

Posted: **April 4th, 2010, 10:36 pm**

So you don't need a left side? Just right and clutch case? Was the kicker gear and the splined shaft indexed properly?

Posted: **April 5th, 2010, 7:37 am**

were the shims on the shaft? if the shims are missing, the kicker gear will move over just enough to grab the flywheel gear at the same time and bind everything up. good luck, mang...

Posted: **April 5th, 2010, 8:05 am**

Shit that sucks

Posted: **April 5th, 2010, 9:08 am**

dannygraves wrote:were the shims on the shaft? if the shims are missing, the kicker gear will move over just enough to grab the flywheel gear at the same time and bind everything up. good luck, mang...

I'm not sure.

It was a 1990 CR 500 he's been riding for a few years now.
Then he got a 2006 CR250 an I did the conversion. then he took it out and BAMMMM all over but the crying... I'm going to call HONDA an get some new cases. I'll know more when I open it up.....

Posted: **May 14th, 2010, 4:54 pm**

i could use the left side if you're going to get all new cases....let me know.

Posted: **May 16th, 2010, 9:59 pm**

south central hoon wrote:i could use the left side if you're going to get all new cases....let me know.

We just got a right side sorry....... I could use a bad left side. Anyone have one.

Posted: **May 17th, 2010, 1:28 am**

I hate tree hugging hippie freaks, i'd love to of seem a couple of 500's tunder in giv'm a roost and blast off out of there....giv'm somthing to realy cry for.
I mean there not the trees from Harry potter that talk...there grouse

BannedCR500Riders.com

In need of some cases

In need of some cases

Re: In need of some cases

cases