Show me the light!

tadiv · Post by **tadiv** » September 25th, 2007, 1:53 pm

I am looking for a rear fender that has an integrated tail/brake light built into not under the fender. If you look at this picture, there is a red light in the fender. I am NOT interested in the white light under it, but the new fender by itself. Anyone know where one like this can be found, I saw one a while back but do not know where (this picture is off the Baja site, and I do not know what bike this is on). Just to make it more fun I need it in black!

If you read 2 boards forgive the double hunt!

britincali · Post by **britincali** » September 25th, 2007, 1:57 pm

The CRF450X rear fender has an integrated LED brake light.

tadiv · Post by **tadiv** » September 25th, 2007, 2:06 pm

What are the odds it will bolt to a 94 steely?

Hellbear · Post by **Hellbear** » September 25th, 2007, 2:15 pm

I'm pretty sure it will but you may need to do a couple little mods. I have a how to on putting newer plastics on older bikes at home.

Post by **AlisoBob** » September 25th, 2007, 2:44 pm

Its a tail light only.... no brake.

It isnt very bright either...

tadiv · Post by **tadiv** » September 25th, 2007, 3:27 pm

If it has no brake it will not work for me. Like I said in the original post I do not need THIS one, just one that has a light mounted in this way. I know I saw an aftermarket one at one time, just don't remember where!

Post by **AlisoBob** » September 25th, 2007, 10:37 pm

5 second search on Google netted this:

http://crfsonly.com/catalog/product_inf ... ts_id/1350

- Fits CRF250X and CRF450X
- Both a tail light and brake light in one package
- Smaller and lighter than the stock LED package - 8 High-intensity LED's are used
- Use the hydraulic brake light switch with this LED light and you'll have a functional brake light.

About $35 out the door...

tadiv · Post by **tadiv** » September 26th, 2007, 4:09 am

Excellent! Now I just need to find the "how to put this fender on a cr" info.

Hellbear · Post by **Hellbear** » October 8th, 2007, 2:20 pm

Ok I found the pics finally.He used a CRF250 fender. I would assume there won't be to much difference between the 250 and 450 fender so here's the 2 pics that pertain to the rear fender. It looks like all you really need to do is drill a couple holes and make 2 spacers. I hope this helps.

I have pics to update all the plastics besides the shrouds. If you want them let me know and I will scan them in and post them up.

crashing_sux · Post by **crashing_sux** » February 24th, 2008, 9:30 pm

I'd love to see pics of how to mount all of the plastics.

BannedCR500Riders.com

Show me the light!

Show me the light!