BannedCR500Riders.com

check out this guys work. nice build and the headstay is awesome.
http://www.thumpertalk.com/forum/showth ... 231&page=5

That is awesome!!!

Man, I wish we had builders like that here.....



That guy must be one of those Aussie dudes, not some Hillbilly out in the back of the woods somewhere....

Thanks for the compliment!! Fun build I must say.... Hopefully it will be all back together tonight

AlisoBob wrote:That is awesome!!!

Man, I wish we had builders like that here.....



That guy must be one of those Aussie dudes, not some Hillbilly out in the back of the woods somewhere....

I know how to find him.

Go to Staples And get a ID-10-t form fill it out and mail it to boB and in 6 plus 8 weeks he will mail you the members IP address.

http://bannedcr500riders.com/board/view ... c&start=45


Here you go....


.

Thats REALLY nice work for a headstay...Alot of effort to be sure

This is what that dumbass RideRed's head stay looks like:

He just used the OEM CRF250R head stay, cut it, flipped it, welded it. Redneck to be sure, but it was free.

I went the "El'-Cheapo" route too..... It was welded after the photos were taken

i did the same why reinvent the wheel when this one rolls fine

Beautiful headstay. Probably the best I've seen.

Its funny how everything turns into a pissing contest I came up with this idea with the idea of reducing vibes on this bike as much as possible, Then asked my buddy Jeff to help me out and we built it.. I would do what ever needed to get my bike going again and hopefully I did not upset anyone by trying to build some trick shit for my project. Hahaha

And for the record, Nothing wrong with either head stay you guys posted.. If I did not have access to Jeff and his Mill mine would have been something similar

There you go, I fixed it for you.

I was playing with you I was just explaining why I built what I did.. Didn't hurt my feelers in the least and Sorry if my playing offended you

What a great hunk of SHIT,
Rip that monstrosity off right now place it in an envelope adressed to Norther Australia & rid yourself of this horrific burden your placing on your self and fellow country men, i emplore you and good sense to do so.

asteroid500 wrote:What a great hunk of SHIT,
Rip that monstrosity off right now place it in an envelope adressed to Norther Australia & rid yourself of this horrific burden your placing on your self and fellow country men, i emplore you and good sense to do so.

I agree... went out in the shop, melted it down and made a new head stay out of zip ties and bailing wire

Hillbilly500 wrote:

asteroid500 wrote:What a great hunk of SHIT,
Rip that monstrosity off right now place it in an envelope adressed to Norther Australia & rid yourself of this horrific burden your placing on your self and fellow country men, i emplore you and good sense to do so.

I agree... went out in the shop, melted it down and made a new head stay out of zip ties and bailing wire

You must be a Farmer then.

bugger i couldnt hood wink you into sending it to me may just have to ask yu how much to machine one up for me

How much money you want to spend It would be kind of hard to make one to those tolerances without the bike being here.. And the measurements would have to be Exact for it to work.. Maybe we could make them a little loose and get by with it.. I will ask my buddy what he thinks if you are serious

just ask him if he wants a few more "Buddies". I need cool friends like that.
Nice piece!

I got a chubby

Who didn't get one after looking at that.
True AF porn for sure.

I talked to my buddy today.. And with exact measurements He will build them for $325.. It is pricey but a ton of labor goes into making them nice and perty with that kind of fit.. He would need drawings, measurements and so on.. Just a FYI.. I have had a few ask so figured I would throw it out there

does that include a fancy powdercoat with pinstrips for the kids?

no, but I was thinking of having mine anodized though.. figure not worth it though since no one will ever see it

but, you'll know its there and so will your buddy

to bad from what I hear all these bikes vary a little bit.. If he could get these things on file for CNC he could knock them out for way less.. Oh well.. still might have it anodized just for the hell of it.. Our local anodizer has a Perfect shade of red for honda.. I think I will call him monday and tell him to let me know the next time he is doing some red.. I will pull it off and throw it in with the rest..

You could get them cast in China for 10$ a piece.
Or do it yourself
http://www.backyardmetalcasting.com/