I bought this 92 CR500 from a guy who moved out here from Oregon.
The bike has a ton of aftermarket parts on it and the cylinder has been worked. Who's signature is this on my cylinder? http://www.bannedcr500riders.com/galler ... re_002.JPG
Posted: February 1st, 2010, 1:52 am
by asteroid500
Well its rather difficult to tell.....
Your photo is lets say the size of an A4 sheet, of witch it's not its been reduced to such a low resolution level its blurry.
The A4, for the sake of this exercise, is the over all image yet your subject matter is the size of a 1cent postage stamp......hard to make an evaluation on that im afraid.
Posted: February 1st, 2010, 4:43 am
by Tharrell
I tried to get a closer pic but the flash messed up the photo. If you save the photo and open it with a utility you can enlarge it. I'm just not familiar with the builders. I'd really like to find out more about this bike. It's got a lot of aftermarket stuff on it, reeds, pipe, race tech suspension, etc...
Posted: February 1st, 2010, 6:38 am
by fastkart
Photo enlarging wouldn't help... it destroys the image quality. Turn off the flash and make sure your camera is set to the closeup setting... macro I think. And try posting the pic in the post itself, instead of the link. Click the little "img" button, paste the link immediately following, then hit the img button again... should look something like this
Done properly, you'll get this when you post:
Posted: February 2nd, 2010, 5:12 am
by Tharrell
I tried everything to get a better pic but it looks like I need natural light.
I'm snowed in AGAIN!
As soon as possible, I'll get it outside for a better pic.
I'm just photographically retarded!
Posted: February 2nd, 2010, 5:58 am
by Roostius_Maximus
i can take decent pics far away with zoom+flash, did this one thismorning for a thread onthe other site
Posted: February 2nd, 2010, 1:36 pm
by Joshwfl
Tharrell wrote: it looks like I need natural light.
AlisoBob wrote:I zoomed in on it.... it reads......
"BrItInCaLi"
This is what the insides look like....
ya know, i bet that thing ran like a raped ape, being hogged out like that, assuming he didnt F up the port timings. but i cant imagine it ran long as he detroyed the structural integrity of the cylinder. oh, and assuming he didnt cut into the water jackets.....which would be a miracle if he didnt.
BTW, what cylinder is that for? ive seen it all over the internet, and it has been for everything from a dirtbike to a LT500R.....
Posted: February 2nd, 2010, 3:34 pm
by Joshwfl
That was in an 89 LT500 Quadzilla I bought not running. That's what I found when I tore it down. The "work" was done so poorly that the coolant leaked through the water jackets into the cylinder. I was able to get it started, and it made MONSTER power but smoked like 10 mosquito foggers side by side.
Posted: February 2nd, 2010, 7:41 pm
by Tharrell
Damn, I can see now I'll have to watch my step with you guys!
Posted: February 3rd, 2010, 2:55 pm
by yota
Bob that cyl looks like what I did to my old TM125 with a 1/2 drill bit when I was about 14 or 15 years old. never could leave anything alone
Posted: February 3rd, 2010, 3:50 pm
by Joshwfl
Yeah, but the guy I bought it from was in his 40's, he should have known better!
Posted: February 4th, 2010, 10:54 pm
by M.F.D.B.
I have this super fantastic program, you can zoom in on a gnats ass and read its license plate in mid flight...The signature is pretty easy to read....
.
.
.
.
.
.
.
.
MAGIC JOHNSON ported yo shit nigga!!!!! I bet you could sell it on FleeBay for at least 2 FO-eeeeeez of OLD ENGLISH!!
Posted: February 5th, 2010, 12:27 am
by CR500R7
WOW! that is an impressive BUST!
Posted: February 5th, 2010, 8:06 am
by M.F.D.B.
CR500R7 wrote:WOW! that is an impressive BUST!
Shit, Ill show you some busts! But your wifey will prolly castrate u...hahaha
Posted: February 5th, 2010, 8:27 am
by AlisoBob
Posted: February 5th, 2010, 11:27 pm
by CR500R7
M.F.D.B. wrote:
CR500R7 wrote:WOW! that is an impressive BUST!
Shit, Ill show you some busts! But your wifey will prolly castrate u...hahaha
What do you mean "prolly castrate me"?
Most definitely would!
Posted: February 6th, 2010, 8:39 am
by M.F.D.B.
CR500R7 wrote:Most definitely would!
Posted: February 6th, 2010, 1:28 pm
by CR500R7
I can get away with it on here because Wifey thinks I'm just on some stupid forum.
It's a good thing Wifey dosen't look at this site.
Posted: February 7th, 2010, 1:55 am
by asteroid500
im a newby to girls...
my wifes got a good set of busts....what are you neant to do with them,
you cant ride them or tear them down and fix'm
Posted: February 7th, 2010, 7:21 am
by Roostius_Maximus
asteroid500 wrote:im a newby to girls...
my wifes got a good set of busts....what are you neant to do with them,
you cant ride them or tear them down and fix'm
they're more of a therapudic thing, i find its best to get back from a ride, get cleaned up, have her bring you a cold drink to start relaxing you, then sit back with atleast 1 hand on her tit and any tension or pain from the ride will soon be next to unnoticable
Posted: February 7th, 2010, 8:57 am
by AlisoBob
im a newby to girls...
my wifes got a good set of busts....what are you neant to do with them?
Posted: February 8th, 2010, 11:38 pm
by asteroid500
Fuck that Bob your a wierdo....the only time i slap my ladys busts is with a hard cock...
