BannedCR500Riders.com

Posted: **November 28th, 2009, 4:50 pm**

Im looking for a weighted flywheel for my 85' anybody want to sell or know where I can find one.

Posted: **November 28th, 2009, 7:08 pm**

what the hell you need a weight for ? get on that sucka and ride like you stole it

Posted: **November 29th, 2009, 6:39 am**

Ive been doing that, just want one to swap on and off for rinding tight technical, I dont know if its what I want just want to try it.

Posted: **November 29th, 2009, 8:54 am**

your trying to drive a dragster on a gokart track. get yourself a XR for them trails

Posted: **November 29th, 2009, 5:05 pm**

http://www.steahlyoffroad.com/
If 1987 and later rotors fit your 1984 you may be in luck. Their flywheel weights take about 15 mins to install / de-install. I have a 13 oz one and it works well.

Posted: **November 30th, 2009, 6:36 am**

flywheel is different 85 to 86, 87-01 are the same

Posted: **November 30th, 2009, 6:58 am**

If you are set on this route, call them and see if they have a generic weld-on (as opposed to bolt-on) weight that would fit.

Posted: **November 30th, 2009, 7:09 am**

if they dont have, i'll get you to measure the 85 flywheel, say how much weight you want and make one for you to weld on

Posted: **November 30th, 2009, 7:32 am**

Thanks Roost Ill measure it in a couple of weeks and get back with you on that. I appriciate your help here and on the other site.

Posted: **November 30th, 2009, 4:05 pm**

Are the early flywheels the same diameter as what an 87 has???
My engine came w/a FWW.
I left it off, and I don't plan to ever use the stupid thing. Though it's a cool paper weight.

If I remember correctly, I think it screws on and has retaining screws.

It's yours, if it'll fit.

Let me know.

Posted: **November 30th, 2009, 9:20 pm**

Ive got a 86 flywheel if it will fit. It has a weight welded on it. pm me if you are intrested.

Posted: **December 1st, 2009, 5:44 am**

thats probably going to work for him, u need to measure the i.d. of the 85 wheel tho, i'll postup the 86 i.d. later

Posted: **December 2nd, 2009, 11:40 am**

Thanks for the help guys, Im moving this weekend and probably wont have time to get to it, Ill message yall when I get it measured.

Posted: **December 9th, 2009, 2:52 pm**

A guy at the other site is hooking me up with a flywheel. Appriciate the advice and comments.

BannedCR500Riders.com

85' weighted flywheel

85' weighted flywheel