Linkage?
- caseyracing222
- Posts: 569
- Joined: January 28th, 2009, 4:20 pm
Linkage?
I just finished rebuilding the motor on my 250. Long story short the rebuild took a long time to complete and the bike sat for about 5 months. well I got the bike back together again and when I sat on it the rear shock felt like it bottomed out in midstroke and wouldnt rebound. I first thought my clickers were off so I put them back to the recomended specs and that didnt fix the problem. I think the linkage froze up is not letting the shock work rite, has anyone else experianced this problem? thanks.
-Jake
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
i siezed the bearing at the "dog bone" or whatever its called by riding in a parade while it rained then letting it sit for a week, had 1.5-2" travel then it would bind
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- caseyracing222
- Posts: 569
- Joined: January 28th, 2009, 4:20 pm