gen 2 service honda roller $2500, gen 2 roller $2000
Posted: May 7th, 2009, 12:36 pm
Anyone looking for a Service Honda chassis ready for there motor? I have not ridden this bike more than 15 times in the last 6 years. I have a lot into to motor and am going to keep that for a future build.
I also have 2 other complete gen 2 rollers that I'm selling. I'd rather hook up a hoon with a exact gen 2 Service Honda replica than part them on ebay. My welder/fab guy is honda certified and worked for NASA for 20+ years welding/fabricating. They don't come any better. He fixes the broken frames for all the honda shops around here. Yes honda frames do break. They don't see an easy life. A Gen 2 roller complete ready for YOUR motor/carb/electrics and YOUR SH pipe/silencer would be $2000 + shipping.I do have some extra pwk's and SH pipes that I could part with.
Check me out on ebay if you want,my feedback speaks for itself. I don't play games with other peoples $$. I'm seanmx57 there as well. I'm not doing this as a bizness, I got carried away on craigslist this last winter and bought more gen 2's than I should have. I thought they would sell by now with the CR250 motors in them but everybody wants to trade me old junk sleds for them or lowball me.
I know the pics suck, here are 3 of the SH frame.
I take very good care of my bikes. The first thing I did when I got it from SH was strip it to the frame and grease everything properly, anti-seize threads on chassis fasteners, etc. I do this with any bike I plan to keep.
Chassis has Zero mechanical issues. I change the brake fluid regularly. I have 2 sets of extra suspension that you can choose from. A almost new stock set, perfect shape, no dings, less than 20 hours total. I also have a Factory Connection set I got off another roller that needs a rebuild. It's already been revalved by FC but the seals are gone. A rebuild would be $70 + oil and parts. The valving would be set up to your specs. Springs would be extra as well. FC is local for me and I have a buddy that works there so I get a deal. If you want the FC set the roller would be $2700 + the rebuild expenses. If not stock it is. The bars will be pro tapers and triple clamp will be stock with a 1 1/8 bar clamp. This bike has never seen a bad crash. Sub frame/frame are straight original and never tweaked. I always ran a skid guard so lower rails are perfect. Discs are not tweaked or worn out. I have a large selection of rear tires with 1 race on them for the 19" 2.15 rim. New excel front rim and new spline drive spokes, tire is gettin worn but ok for play riding. New condition stock foot pegs. water pump guard is a works connection. I have quite a selection of plastic. I have a NEW set up UFO black on ebay for $125 or honda stuff in nice shape w/ SH decals on the shrouds. Name your tune.
I will ship world wide for reasonable price. I have the motor out now as you can see. I could reassemble or send the piecesl.
Price $2500 + shipping.
I also have 2 other complete gen 2 rollers that I'm selling. I'd rather hook up a hoon with a exact gen 2 Service Honda replica than part them on ebay. My welder/fab guy is honda certified and worked for NASA for 20+ years welding/fabricating. They don't come any better. He fixes the broken frames for all the honda shops around here. Yes honda frames do break. They don't see an easy life. A Gen 2 roller complete ready for YOUR motor/carb/electrics and YOUR SH pipe/silencer would be $2000 + shipping.I do have some extra pwk's and SH pipes that I could part with.
Check me out on ebay if you want,my feedback speaks for itself. I don't play games with other peoples $$. I'm seanmx57 there as well. I'm not doing this as a bizness, I got carried away on craigslist this last winter and bought more gen 2's than I should have. I thought they would sell by now with the CR250 motors in them but everybody wants to trade me old junk sleds for them or lowball me.
I know the pics suck, here are 3 of the SH frame.
I take very good care of my bikes. The first thing I did when I got it from SH was strip it to the frame and grease everything properly, anti-seize threads on chassis fasteners, etc. I do this with any bike I plan to keep.
Chassis has Zero mechanical issues. I change the brake fluid regularly. I have 2 sets of extra suspension that you can choose from. A almost new stock set, perfect shape, no dings, less than 20 hours total. I also have a Factory Connection set I got off another roller that needs a rebuild. It's already been revalved by FC but the seals are gone. A rebuild would be $70 + oil and parts. The valving would be set up to your specs. Springs would be extra as well. FC is local for me and I have a buddy that works there so I get a deal. If you want the FC set the roller would be $2700 + the rebuild expenses. If not stock it is. The bars will be pro tapers and triple clamp will be stock with a 1 1/8 bar clamp. This bike has never seen a bad crash. Sub frame/frame are straight original and never tweaked. I always ran a skid guard so lower rails are perfect. Discs are not tweaked or worn out. I have a large selection of rear tires with 1 race on them for the 19" 2.15 rim. New excel front rim and new spline drive spokes, tire is gettin worn but ok for play riding. New condition stock foot pegs. water pump guard is a works connection. I have quite a selection of plastic. I have a NEW set up UFO black on ebay for $125 or honda stuff in nice shape w/ SH decals on the shrouds. Name your tune.
I will ship world wide for reasonable price. I have the motor out now as you can see. I could reassemble or send the piecesl.
Price $2500 + shipping.