Page 1 of 1
41mm PWK - 0-1500' What you running for jets?
Posted: April 28th, 2009, 2:35 pm
by torque monster
I'm getting really close on the jetting on my carb and want to find out what others with similiar carbs and altitude run. How about any of you California, Florida, Nevada, etc guys run the 41mm and what you using for jets. Yes, I know each bike is somewhat different but just getting ideas. I know how to jet a carb just looking for reference points.
Cheers
Chris
Posted: April 28th, 2009, 2:55 pm
by AlisoBob
#40 pilot
#172 main
1470 needle, clip in the middle
Its still black around the sliencer cap, I'll prolly go to the 1472 needle for summer.
Posted: April 28th, 2009, 7:05 pm
by torque monster
Thanks Bob, I was at a 45 pilot and though I might try a 42 or 40 like you've got.
Posted: April 28th, 2009, 8:58 pm
by AlisoBob
The carb seems to runs best with the air screw about 1 turn out.... adjust the pilot to make this happen....
Get one of these too....... When we ride places like Jawbone where the temps and elevation vary greatly over a weekend... Its really handy to have.
http://www.ziptyracing.com/products/pro ... d=MTEwMA==
Posted: April 28th, 2009, 9:42 pm
by MojoScojo