Page 1 of 1
TTM which pipe
Posted: April 15th, 2009, 12:07 pm
by honda02
I purchased a used TTM roller it needs a pipe I want to use a PC will it fit with out doing anything to it that go's for the silencer also.
Posted: April 15th, 2009, 1:12 pm
by yota
if your roller is a 125 frame I have heard that some pipes will get bashed by the tire when the front suspension gets fully compressed. Did you call Mike atT TR and ask him?
Frame
Posted: April 15th, 2009, 2:17 pm
by honda02
My frame is a 2005 CRF450X
PIPE
Posted: April 16th, 2009, 1:06 pm
by honda02
I talked to Mike at TTM my bike Takes a SH pipe from PC I wanted the power band to come on latter thats why I when with the PC the FMF comes on sonner I don't want that kind of power I want the over rev.
Posted: April 16th, 2009, 5:12 pm
by dannygraves
so, you got Franks frame, eh?
Posted: April 16th, 2009, 7:32 pm
by 100hp honda
dannygraves wrote:so, you got Franks frame, eh?
what was the verdict on that photo. dog hair or crack ?
Dog hair
Posted: April 16th, 2009, 8:23 pm
by honda02
I goning to get the frame NDI I already asked him was he going to back up the frame If was cracked he said he will.
I told him I was going to get the frame eddy current NDI checked where if was cracked ir can't hide.
I mite get the black powdercoating stripped off anyways.
I been looking into doing this with chemical type stripper I just wondering what the surface of the metal going to look like I like the stock type finish my self.
I do the swingarm and the subframe fro sure.
If it is cracked I don't live to far from TTM I always can get mike to fix it up If I have to.
Anyways I like to meet him I talked to him on the Phone we ran the same stomping grounds and tracks growing up.